Building a Process Model-The Graphical Model Builder-2

|Debug Submenu（调试子菜单）||
| ------------- |:-------------:| :-----:|
|

| Standard(标准)–显示或关闭标准工具栏。 Formatting(格式)–显示或关闭格式工具栏。Standard(标准) –显示或关闭标准工具栏。
|Layout Menu（设计菜单） ||
|

|Align Objects（位置调整工具）–打开位置调整工具子菜单。Space Evenly（间距均匀）–打开间距子菜单。 Center in View（视点居中）–打开视点居中子菜单。Make Same Size（相同大小）–打开相同大小子菜单。MIMO – 打开MIMO块子菜单。Grid Settings（网格设置）– 自定义模型构建器网格。|
|Align Objects Submenu（对齐对象子菜单）(只有选中多个块才可用) ||
|

|Left –对齐选中对象的左侧。Right –对齐选中对象的右侧。Top –对齐选中对象的顶部。Bottom –对齐选中对象的底部。Vert. Center（垂直中心）– 将选中的目标按一条垂直线对齐。Horz. Center（水平中心）–将选中的目标按一条水平线对齐。|
|Space Evenly Submenu（间距均匀子菜单）(只有选中3个或3个以上的块时才可用) ||
|

| Across（水平）–将窗口中选择的对象水平对齐。 Down（竖直）–将窗口中选择的对象垂直对齐。 |
|Center in View Submenu（视点居中子菜单） | |
|

|Vertical（垂直）–将窗口中选择的对象中心垂直。 Horizontal（水平）–将窗口中选择的对象中心水平。 |
|Make Same Size Submenu（相同大小子菜单）(只有选中多个模块时才可用) ||
|

|Width（宽度）–使选取的对象具有相同的宽度。 Height（高度）–使选取的对象具有相同的高度。Both（同时）–使选取的对象具有相同的高度和宽度。|
|MIMO Submenu（MIMO子菜单）(只有当MIMO块窗口打开时才可用) ||
|

| Insert Row（插入行）–在选中行下的传递函数矩阵中插入一行（增加一个输入）。Delete Row（删除行）–在选中行下的传递函数矩阵中删除一行（删除一个输入）。Insert Column（插入列）–在选中列右方的传递函数矩阵中插入一列（增加一个输出）。Delete Column（删除列）–在选中列右方的传递函数矩阵中删除一列（减少一个输出）。|
|Draw Menu（绘制菜单） ||
|

|Zoom（缩放）–打开缩放选择列表。SubSystem（子系统）– 打开子系统菜单创建/取消分组子系统。Fold into MIMO Block（折叠入MIMO模块）– 创建一个包含选定块的MIMO模块。Edit Points Mode（编辑点模式）–在选中的行上编辑点。Rearrange Blocks（重排模块）–打开重排模块菜单。 Auto Route Lines（自动路线图）–打开重排路线图 。Line Connector Repeats（重复线连接）–当绘制新线时软件包停留在连接模式。Connector（连接器）–使用连接器工具绘制新的线。|

---

原文：

| Debug Submenu | |
| ------------- |:-------------:| :-----:|
| | Standard – Display or close the standard toolbar.Formatting – Display or close the formatting toolbar.Standard – Display or close the standard toolbar.
| Layout Menu | |
| | Align Objects – Open the align objects submenu.Space Evenly – Open the spacing submenu.Center in View – Open the Center in View submenu.Make Same Size – Open the Make Same Size submenu.MIMO – Open the MIMO block submenu.Grid Settings – Customize the model builder grid. |
| Align Objects Submenu(Enabled only when multiple blocks are selected) | |
| | Left – Align the left sides of the selected objects.Right – Align the right sides of the selected objects.Top – Align the tops of the selected objects.Bottom – Align the bottoms of the selected objects.Vert. Center – Center the selected objects in a vertical line.Horz. Center – Center the selected objects in a horizontal line.
| Space Evenly Submenu(Enabled only when three or more blocks are selected) |
| | Across – Align the selected objects horizontally across the window.Down – Align the selected objects vertically down the window. |
| Center in View Submenu | |
| | Vertical – Center the selected objects vertically in the window.Horizontal – Center the selected objects horizontally in the window. |
| Make Same Size Submenu(Enabled only when multiple blocks are selected) | |
| | Width – Make the selected objects the same width.Height – Make the selected objects the same height.Both – Make the selected objects the same width and height. |
| MIMO Submenu (Enabled only when MIMO block window is opened) | |
| | Insert Row – Insert one row into the transfer function matrix below the selected row (increase the number of inputs by one).Delete Row – Delete the selected row from the transfer function matrix (decrease the number of inputs by one).Insert Column – Insert one column into the transfer function matrix to the right of the selected column (increase the number of outputs by one).Delete Column – Delete the selected column from the transfer function matrix (decrease the number of outputs by one). |
| Draw Menu | |
| | Zoom – Open the zoom selection list.SubSystem – Open the SubSystem menu for creating/ungrouping subsystems.Fold into MIMO Block – Create a MIMO block containing the selected blocks.Edit Points Mode – Edit points on the selected line.Rearrange Blocks – Open the menu for rearranging blocks.Auto Route Lines – Open the menu to re-route the lines.Line Connector Repeats – The package stays in connector mode when drawing a new line.Connector – Use the connector tool to draw a new line. |

---

2016.7.20