Flash Garbage collector

 To understand how to optimize your code for ActionScript 3.0, you'll first need an understanding of how the garbage collector works in Flash Player 9. Flash has two processes for finding objects that are not in active use and removing them. This article looks at both techniques and describes how they are relevant to your code.

At the end of this article you can find a simulation of the garbage collector in Flash Player 9 that visually demonstrates the concepts explained herein.

About the garbage collector

The garbage collector is a behind-the-scenes process that is responsible for deallocating the memory used by objects that are no longer in use by the application. An inactive object is one that no longer has any references to it from other active objects. In order to understand this, it is very important to realize that when working with non-primitive types (anything other than Boolean, String, Number, uint, int), you are always passing around a reference to the object, not the object itself. When you delete a variable you remove the reference, not the object itself.

This is easily demonstrated in the code below:

// create a new object, and put a reference to it in a: var a:Object = {foo:"bar"} // copy the reference to the object into b: var b:Object = a; // delete the reference to the object in a: delete(a); // check to see that the object is still referenced by b: trace(b.foo); // traces "bar", so the object still exists.

If I were to update the code in the example above and delete "b" as well, it would leave my object with no active references and free it for garbage collection. The ActionScript 3.0 garbage collector uses two methods for locating objects with no active references: reference counting and mark sweeping.

Reference counting

Reference counting is one of the simplest methods for keeping track of active objects, and has been used in Flash since ActionScript 1.0. When you create a reference to an object, its reference count is incremented. When you delete a reference, its reference count is decremented. If the reference count of an object reaches zero, it is marked for deletion by the garbage collector.

Here's an example:

var a:Object = {foo:"bar"} // the object now has a reference count of 1 (a) var b:Object = a; // now it has a reference count of 2 (a & b) delete(a); // back to 1 (b) delete(b); // the reference count down is now 0 // the object can now be deallocated by the garbage collector

Reference counting is simple, it doesn't carry a huge CPU overhead, and it works well in most situations. Unfortunately, the reference counting method for garbage collection is not optimal when it comes to circular referencing. Circular referencing is the situation when objects cross-reference each other (directly, or indirectly via other objects). Even if the application is no longer actively using the objects, their reference counts remain above zero, so the garbage collector never removes them. The code below illustrates how this works:

var a:Object = {} // create a second object, and reference the first object: var b:Object = {foo:a}; // make the first object reference the second as well: a.foo = b; // delete both active application references: delete(a); delete(b);

In the code shown above, both of the active application references have been deleted. I no longer have any way of accessing the two objects from my application, but the reference counts of both objects are 1 because they reference each other. This situation can become much more complex (a references c, which references b, which references a, etc.) and can be difficult to deal with in code. Flash Player 6 and 7 had issues relating to circular referencing in XML objects: each XML node referenced both its children and its parent, so they were never deallocated. Fortunately, Flash Player 8 added a new garbage collection technique called mark and sweep.

Mark sweeping

The second strategy employed by the ActionScript 3.0 (and Flash Player 8) garbage collector to find inactive objects is a method called mark and sweep. Flash Player starts at the root object of your application (which is conveniently called the "root" in ActionScript 3.0) and walks through every reference in it, marking each object it finds.

Next, Flash Player iterates through each of the marked objects. It continues this behavior recursively until it has traversed the entire object tree of your application, marking everything it can reach through an active reference. At the end of this process, Flash Player can safely assume that any objects in memory that are not marked no longer have any active references to them and can be safely deallocated. Figure 1 illustrates how this works: The green references were followed by Flash Player during marking, the green objects are marked, and the white objects will be deallocated.

Figure 1. Objects that no longer have active references are identified by Flash Player using the mark and sweep method

Mark and sweep is very accurate. However, because Flash Player has to traverse your entire object structure, the process is costly in terms of CPU usage. Flash Player 9 reduces this cost by carrying out iterative mark and sweep—the process occurs over a number of frames, instead of all at once—and by running this process only occasionally.

Deferred garbage collector and indeterminacy

In Flash Player 9, the garbage collector's operations are deferred. This is a very important thing to understand. Your objects will not be removed immediately when all active references are deleted. Rather, they will be removed at some indeterminate time in the future (from a developer standpoint). The garbage collector uses a set of heuristics that look at the RAM allocation and the size of the memory stack, among other things, to determine when to run. As a developer, you must accept the fact that you will have no way of knowing when, or even if, your inactive objects will get deallocated. You must also be aware that inactive objects will continue to execute indefinitely, until the garbage collector deallocates them, so your code will keep running (enterFrame events will continue), sounds will keep playing, loads will keep happening, other events will keep firing, and so on.

It's very important to remember that you have no control over when the garbage collector in Flash Player will deallocate your objects. As a developer, you will want to make the objects in your games and applications as inert as possible when you are finished with them. Strategies to manage this process will be the focus of my companion article, Resource management strategies in Flash Player 9.

Notice the sawtooth pattern of the total memory in the following garbage collection simulation (click Figure 2). The dips are caused when the collector carries out a sweep. Click on the chart to focus it, then press Spacebar to pause or restart, and hold the up/down arrows to change the memory usage trend as it runs.