【Spark二十】运行Spark Streaming的NetworkWordCount实例

Spark Streaming简介

 

NetworkWordCount代码

 

/*
* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
package org.apache.spark.examples.streaming
import org.apache.spark.SparkConf
import org.apache.spark.streaming.{Seconds, StreamingContext}
import org.apache.spark.storage.StorageLevel
/**
* Counts words in UTF8 encoded, '\n' delimited text received from the network every second.
*
* Usage: NetworkWordCount <hostname> <port>
* <hostname> and <port> describe the TCP server that Spark Streaming would connect to receive data.
*
* To run this on your local machine, you need to first run a Netcat server
* `$ nc -lk 9999`
* and then run the example
* `$ bin/run-example org.apache.spark.examples.streaming.NetworkWordCount localhost 9999`
*/
object NetworkWordCount {
	def main(args: Array[String]) {
		if (args.length < 2) {
		System.err.println("Usage: NetworkWordCount <hostname> <port>")
		System.exit(1)
	}
	StreamingExamples.setStreamingLogLevels()
	// Create the context with a 1 second batch size
	// 创建SparkConf实例
	val sparkConf = new SparkConf().setAppName("NetworkWordCount")
	
	///创建Spark Streaming Context,每隔1秒钟处理一批数据,那么这一秒收集的数据存放在哪,如何将收集的数据推送出去?是生产者主动推出去还是消费者每隔1秒钟来拉取一次数据
	val ssc = new StreamingContext(sparkConf, Seconds(1))
	
	// Create a socket stream on target ip:port and count the
	// words in input stream of \n delimited text (eg. generated by 'nc')
	// Note that no duplication in storage level only for running locally.
	// Replication necessary in distributed scenario for fault tolerance.
	val lines = ssc.socketTextStream(args(0), args(1).toInt, StorageLevel.MEMORY_AND_DISK_SER)
	//flatMap是把将每一行使用空格做分解,那么words对应的数据结构是怎么样的?
        ///words是个集合,每个集合元素依然是个集合,这个集合存放单词
        val words = lines.flatMap(_.split(" "))
	val wordCounts = words.map(x => (x, 1)).reduceByKey(_ + _)
	wordCounts.print()
	//启动计算作业
	ssc.start()
	
	//等待结束,什么时候结束作业,即触发什么条件会让作业执行结束
	ssc.awaitTermination()
   }
}

 

 运行NetworkWordCount

 1. 启动NetCat命令

 

[hadoop@hadoop ~]$ nc -lk 9999
This is a book 

启动后,可以在后面输入文本,比如This is a book

 

2. 在另外一个终端,Spark提交NetworkWordCount任务

 

./bin/run-example streaming.NetworkWordCount localhost 9999

 

启动后,发现每隔一秒钟,打印一行日志,例如

 

15/01/11 00:10:09 INFO scheduler.JobScheduler: Added jobs for time 1420953009000 ms
15/01/11 00:10:10 INFO scheduler.JobScheduler: Added jobs for time 1420953010000 ms
15/01/11 00:10:11 INFO scheduler.JobScheduler: Added jobs for time 1420953011000 ms
15/01/11 00:10:12 INFO scheduler.JobScheduler: Added jobs for time 1420953012000 ms
15/01/11 00:10:13 INFO scheduler.JobScheduler: Added jobs for time 1420953013000 ms
15/01/11 00:10:14 INFO scheduler.JobScheduler: Added jobs for time 1420953014000 ms
15/01/11 00:10:15 INFO scheduler.JobScheduler: Added jobs for time 1420953015000 ms
15/01/11 00:10:16 INFO scheduler.JobScheduler: Added jobs for time 1420953016000 ms
15/01/11 00:10:17 INFO scheduler.JobScheduler: Added jobs for time 1420953017000 ms
15/01/11 00:10:18 INFO scheduler.JobScheduler: Added jobs for time 1420953018000 ms

///Added jobs是个什么概念?不就是一个Job吗
15/01/11 00:10:19 INFO scheduler.JobScheduler: Added jobs for time 1420953019000 ms
15/01/11 00:10:20 INFO scheduler.JobScheduler: Added jobs for time 1420953020000 ms
15/01/11 00:10:21 INFO scheduler.JobScheduler: Added jobs for time 1420953021000 ms
15/01/11 00:10:22 INFO scheduler.JobScheduler: Added jobs for time 1420953022000 ms
15/01/11 00:10:23 INFO scheduler.JobScheduler: Added jobs for time 1420953023000 ms
15/01/11 00:10:24 INFO scheduler.JobScheduler: Added jobs for time 1420953024000 ms
15/01/11 00:10:25 INFO scheduler.JobScheduler: Added jobs for time 1420953025000 ms
15/01/11 00:10:26 INFO scheduler.JobScheduler: Added jobs for time 1420953026000 ms
15/01/11 00:10:27 INFO scheduler.JobScheduler: Added jobs for time 1420953027000 ms
15/01/11 00:10:28 INFO scheduler.JobScheduler: Added jobs for time 1420953028000 ms

 

3. 在nc -lk运行的终端,输入文本,发现Spark作业没有将文本输出

不过通过nc -lk输入一行文本后,控制台会显示如下信息

 

5/01/11 00:29:08 INFO storage.MemoryStore: ensureFreeSpace(11) called with curMem=91198, maxMem=280248975
15/01/11 00:29:08 INFO storage.MemoryStore: Block input-0-1420954147800 stored as bytes in memory (estimated size 11.0 B, free 267.2 MB)
15/01/11 00:29:08 INFO scheduler.JobScheduler: Added jobs for time 1420954148000 ms
15/01/11 00:29:08 INFO storage.BlockManagerInfo: Added input-0-1420954147800 in memory on localhost:57786 (size: 11.0 B, free: 267.2 MB)
15/01/11 00:29:08 INFO storage.BlockManagerMaster: Updated info of block input-0-1420954147800
15/01/11 00:29:08 INFO receiver.BlockGenerator: Pushed block input-0-1420954147800

 

4. 关闭nc命令的执行,此时,Spark报错,提示9999端口连接不上

 

///相对于数据源而言,Spark是Receiver,所以Spark Streaming有Receiver这个模块
15/01/11 00:09:36 INFO receiver.ReceiverSupervisorImpl: Stopped receiver 0
15/01/11 00:09:37 INFO scheduler.JobScheduler: Added jobs for time 1420952977000 ms
15/01/11 00:09:38 INFO scheduler.JobScheduler: Added jobs for time 1420952978000 ms
///重提开始Receiver
15/01/11 00:09:38 INFO receiver.ReceiverSupervisorImpl: Starting receiver again
15/01/11 00:09:38 INFO receiver.ReceiverSupervisorImpl: Starting receiver
15/01/11 00:09:38 INFO receiver.ReceiverSupervisorImpl: Called receiver onStart
15/01/11 00:09:38 INFO scheduler.ReceiverTracker: Registered receiver for stream 0 from akka://sparkDriver
15/01/11 00:09:38 INFO receiver.ReceiverSupervisorImpl: Receiver started again
15/01/11 00:09:38 INFO dstream.SocketReceiver: Connecting to localhost:9999
15/01/11 00:09:38 WARN receiver.ReceiverSupervisorImpl: Restarting receiver with delay 2000 ms: Error connecting to localhost:9999
java.net.ConnectException: Connection refused
	at java.net.PlainSocketImpl.socketConnect(Native Method)
	at java.net.AbstractPlainSocketImpl.doConnect(AbstractPlainSocketImpl.java:339)
	at java.net.AbstractPlainSocketImpl.connectToAddress(AbstractPlainSocketImpl.java:200)
	at java.net.AbstractPlainSocketImpl.connect(AbstractPlainSocketImpl.java:182)
	at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:392)
	at java.net.Socket.connect(Socket.java:579)
	at java.net.Socket.connect(Socket.java:528)
	at java.net.Socket.<init>(Socket.java:425)
	at java.net.Socket.<init>(Socket.java:208)
	at org.apache.spark.streaming.dstream.SocketReceiver.receive(SocketInputDStream.scala:71)
	at org.apache.spark.streaming.dstream.SocketReceiver$$anon$2.run(SocketInputDStream.scala:57)

 

关于接不到消息

下面的代码收不到消息

 

val sparkConf = new SparkConf().setAppName("SparkStreamingExample").setMaster("local")

 

而下面的代码则能收到消息

 

val sparkConf = new SparkConf().setAppName("SparkStreamingExample").setMaster("local[2]")

原因来自于http://spark.apache.org/docs/latest/streaming-programming-guide.html:

  • When running a Spark Streaming program locally, do not use “local” or “local[1]” as the master URL. Either of these means that only one thread will be used for running tasks locally. If you are using a input DStream based on a receiver (e.g. sockets, Kafka, Flume, etc.), then the single thread will be used to run the receiver, leaving no thread for processing the received data. Hence, when running locally, always use “local[n]” as the master URL where n > number of receivers to run (see Spark Properties for information on how to set the master).

  • Extending the logic to running on a cluster, the number of cores allocated to the Spark Streaming application must be more than the number of receivers. Otherwise the system will receive data, but not be able to process them.

 关于Receiver的线程数

上面提到,有一个线程用于运行Receiver,实际中,可能需要多个线程运行Receiver:

Receiving data over the network (like Kafka, Flume, socket, etc.) requires the data to deserialized and stored in Spark. If the data receiving becomes a bottleneck in the system, then consider parallelizing the data receiving. Note that each input DStream creates a single receiver (running on a worker machine) that receives a single stream of data. Receiving multiple data streams can therefore be achieved by creating multiple input DStreams and configuring them to receive different partitions of the data stream from the source(s). For example, a single Kafka input DStream receiving two topics of data can be split into two Kafka input streams, each receiving only one topic. This would run two receivers on two workers, thus allowing data to be received in parallel, and increasing overall throughput. These multiple DStream can be unioned together to create a single DStream. Then the transformations that was being applied on the single input DStream can applied on the unified stream. This is done as follows

 

val numStreams = 5
val kafkaStreams = (1 to numStreams).map { i => KafkaUtils.createStream(...) }
val unifiedStream = streamingContext.union(kafkaStreams)
unifiedStream.print()

 

关于Spark内部处理数据的并行数

Cluster resources can be under-utilized if the number of parallel tasks used in any stage of the computation is not high enough. For example, for distributed reduce operations like reduceByKey and reduceByKeyAndWindow, the default number of parallel tasks is controlled by thespark.default.parallelism configuration property. You can pass the level of parallelism as an argument (see PairDStreamFunctions documentation), or set the spark.default.parallelism configuration property to change the default.

 

关于谁先启动:

如果SparkStreaming先启动而9999端口后启动,会发生什么样的情况?

首先,SparkStreaming每次到了时间点都会提示连接失败,也就是说,每次操作都是尝试新建连接。

1. 实际上,当SparkStreaming每次时间间隔到了进行提交作业时,都会首先start Receiver,本次Job运行完成时再stop Receiver,如下是一个时间点在没有开启9999的一个情况

[hadoop@hadoop ~]$ cat spark.log | grep "2015-02-20 00:50:04"
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Slicing from 1424411402000 ms to 1424411404000 ms (aligned to 1424411402000 ms and 1424411404000 ms)
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Added jobs for time 1424411404000 ms
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Starting job: foreachRDD at LogAnalyzerStreamingSQL.scala:44
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Job 238 finished: foreachRDD at LogAnalyzerStreamingSQL.scala:44, took 0.000036 s
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Starting job streaming job 1424411404000 ms.0 from job set of time 1424411404000 ms
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Finished job streaming job 1424411404000 ms.0 from job set of time 1424411404000 ms
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Total delay: 0.012 s for time 1424411404000 ms (execution: 0.000 s)
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 711 from persistence list
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 711
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 704 from persistence list
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 704
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 703 from persistence list
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing RDD 703
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Removing blocks of RDD BlockRDD[703] at socketTextStream at LogAnalyzerStreamingSQL.scala:38 of time 1424411404000 ms
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Deleting batches ArrayBuffer()
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Deleting batches ArrayBuffer(1424411400000 ms)
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Starting receiver again
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Starting receiver
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Called receiver onStart
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Registered receiver for stream 0 from akka://sparkDriver
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Receiver started again
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Connecting to hadoop.master:9999
[WARN ] [2015-02-20 00:50:04] [Logging$class:logWarning:92] Restarting receiver with delay 2000 ms: Error connecting to hadoop.master:9999
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Stopping receiver with message: Restarting receiver with delay 2000ms: Error connecting to hadoop.master:9999: java.net.ConnectException: Connection refused
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Called receiver onStop
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Deregistering receiver 0
[ERROR] [2015-02-20 00:50:04] [Logging$class:logError:75] Deregistered receiver for stream 0: Restarting receiver with delay 2000ms: Error connecting to hadoop.master:9999 - java.net.ConnectException: Connection refused
[INFO ] [2015-02-20 00:50:04] [Logging$class:logInfo:59] Stopped receiver 0

 

 上面的日志有Starting receiver和Stopped Receiver的输出,同时,也有java.net.Connection refused的异常

 

2. 虽然9999端口没有监听上,但是此时由于提交了spark streaming application,那么spark streaming application已经开始正常运行了,即上面的wordcount例子,words这个RDD为空,下面的代码更能说明问题:

 

package spark.examples.databricks.reference.apps.loganalysis

import org.apache.spark.sql.SQLContext
import org.apache.spark.{SparkContext, SparkConf}
import org.apache.spark.streaming.{StreamingContext, Duration}

/**
 * The LogAnalyzerStreamingSQL is similar to LogAnalyzerStreaming, except
 * it computes stats using Spark SQL.
 *
 * To feed the new lines of some logfile into a socket for streaming,
 * Run this command:
 *   % tail -f [YOUR_LOG_FILE] | nc -lk 9999
 *
 * If you don't have a live log file that is being written to,
 * you can add test lines using this command:
 *   % cat ../../data/apache.access.log >> [YOUR_LOG_FILE]
 *
 * Example command to run:
 * % spark-submit
 *   --class "com.databricks.apps.logs.chapter1.LogAnalyzerStreaming"
 *   --master local[4]
 *   target/scala-2.10/spark-logs-analyzer_2.10-1.0.jar
 */
object LogAnalyzerStreamingSQL {
  val WINDOW_LENGTH = new Duration(4 * 1000)
  val SLIDE_INTERVAL = new Duration(2 * 1000)

  def main(args: Array[String]) {
    val sparkConf = new SparkConf().setAppName("Log Analyzer Streaming SQL in Scala")
    val sc = new SparkContext(sparkConf)

    val sqlContext = new SQLContext(sc)
    import sqlContext.createSchemaRDD

    val streamingContext = new StreamingContext(sc, SLIDE_INTERVAL)

    //首先应该监听上localhost:9999端口,如果不监听会发生什么情况?
    //下面的逻辑  println("No access com.databricks.app.logs received in this time interval")已经执行了
    //同时日志中报出Connection Refused错误
    val logLinesDStream = streamingContext.socketTextStream("localhost", 9999)

    //转换成DStream[ApacheAccessLog]
    val accessLogsDStream = logLinesDStream.map(ApacheAccessLog.parseLogLine).cache()

    val windowDStream = accessLogsDStream.window(WINDOW_LENGTH, SLIDE_INTERVAL)

    windowDStream.foreachRDD(accessLogs => {
      if (accessLogs.count() == 0) {
        println("No access com.databricks.app.logs received in this time interval")
      } else {
        accessLogs.registerTempTable("TBL_ACCESS_LOG")

        // Calculate statistics based on the content size.
        val contentSizeStats = sqlContext
          .sql("SELECT SUM(contentSize), COUNT(*), MIN(contentSize), MAX(contentSize) FROM TBL_ACCESS_LOG")
          .first()
        println("Content Size Avg: %s, Min: %s, Max: %s".format(
          contentSizeStats.getLong(0) / contentSizeStats.getLong(1),
          contentSizeStats(2),
          contentSizeStats(3)))

        // Compute Response Code to Count.
        val responseCodeToCount = sqlContext
          .sql("SELECT responseCode, COUNT(*) FROM TBL_ACCESS_LOG GROUP BY responseCode")
          .map(row => (row.getInt(0), row.getLong(1)))
          .take(1000)
        println(s"""Response code counts: ${responseCodeToCount.mkString("[", ",", "]")}""")

        // Any IPAddress that has accessed the server more than 10 times.
        val ipAddresses =sqlContext
          .sql("SELECT ipAddress, COUNT(*) AS total FROM TBL_ACCESS_LOG GROUP BY ipAddress HAVING total > 10")
          .map(row => row.getString(0))
          .take(100)
        println(s"""IPAddresses > 10 times: ${ipAddresses.mkString("[", ",", "]")}""")

        val topEndpoints = sqlContext
          .sql("SELECT endpoint, COUNT(*) AS total FROM TBL_ACCESS_LOG GROUP BY endpoint ORDER BY total DESC LIMIT 10")
          .map(row => (row.getString(0), row.getLong(1)))
          .collect()
        println(s"""Top Endpoints: ${topEndpoints.mkString("[", ",", "]")}""")
      }
    })

    streamingContext.start()
    streamingContext.awaitTermination()
  }
}

 虽然9999端口没有开启监听,但是spark streaming application的console,定时的输出No access com.databricks.app.logs received in this time interval

 

 

 

 

 

 

你可能感兴趣的:(wordcount)