Adding new vendor and product IDs to an existin...

Adding new vendor and product IDs to an existing USB driver on Raspberry Pi

file : sudo nano /etc/udev/rules.d/95-pl2303.rules
# Rules for hotplugging PL2303 USB frobitzers
SUBSYSTEM=="usb", ATTRS{idVendor}=="1680", ATTRS{idProduct}=="0460", RUN+="/etc/pl2303.sh"

file : sudo nano /etc/pl2303.sh 
modprobe pl2303
echo 1680 0460 > /sys/bus/usb-serial/drivers/pl2303/new_id

sudo reboot