CC2530 zigbee IAR8.10.1环境搭建

本文主要内容来至于NJGB科技，感谢NJGB科技。

1 IAR Embedded Workbench for 8051 8.10.1
安装文件：“2014-8-1-NJZBcc2530\1.软件工具\CD-EW8051-810”
Keygen：“2014-8-1-NJZBcc2530\1.软件工具\IAR_KeyGen”
必须选择版本8.10.1

2 安装zigbee协议栈----zstack-251a
安装文件：“2014-8-1-NJZBcc2530\1.软件工具\ZStack-CC2530-2.5.1a”

3 安装smartrf programmer软件
.hex烧录工具就在这个软件里，名字叫Flash Programmer

4 安装驱动
4.1仿真器驱动的安装
驱动目录在：“...\IAR Systems\Embedded Workbench 6.0\8051\drivers\Texas Instruments”
名字：Chipcon SRF04EB (SmartRF04EB)

4.2安装usb转串口驱动
驱动目录在：“2014-8-1-NJZBcc2530\1.软件工具\HL-340 USB转串口驱动”

USB-SERIAL CH340, Baudrate: 9600, no flow control

5 JLX12864
- 接口SPI
- 内部集成GRAM
- 12864表示分辨率是128 x 64，类似于Nokia5110，只是模块额外集成了一个SPI接口的字库

6 Abbreviation
CC2530: Chipcon，现已被TI收购
USB BH reset：Bigger Hammer or Brad Hosler，表示warm reset；you may be confused why the USB 3.0 spec calls the same type of reset "warm reset" in some places and "BH reset" in other places. "BH" reset is supposed to stand for "Big Hammer" reset, but it also stands for "Brad Hosler". Brad died shortly after the USB 3.0 bus specification was started, and they decided to name the reset after him. The suggestion was made shortly before the spec was finalized, so the wording is a bit inconsistent.