新品上市IC NCS8803:HDMI转EDP转接芯片

新产品：HDMI转EDP芯片

1、功能：HDMI转EDP  带Scaler

2、分辨率：2560*1600

3、封装：QFN-56

HDMI-to-eDP Converter w/ scaler

1 Features
Embedded-DisplayPort (eDP) Output 1/2/4-lane eDP @ 1.62/2.7Gbps per lane HD to WQXGA (2560*1600) supported Up to 6dB pre-emphasis
HDMI Input
HDMI 1.4a supported RGB444/YCbCr444/YCbCr422 supported Pixel clock up to 340MHz 2-channel audio supportedSupport Hot-Plug Detect
Adaptive equalization
Reference Clock
Any freq. between 19MHz and 100MHz Crystal or single-ended clock input Built-in 5000ppm SSC generator
Misc
I2C for chip configuration Built-in eDP handshake protocol I2C-AUX channel for TCON/DPCD/EDID control Built-in video test pattern
Power
1.2V core supply 2.5V or 3.3V IO supply Power consumption ~ 150mW @ 2560*1600*24bit*60Hz Deep-sleep mode power <1mW
Package
QFN-56 (7mm x 7mm) package RoHS Compliant Sample available now
2 Block Diagram

3 General Description
NCS8803 is a low-power HDMI-to-DisplayPort/eDP converter with advanced scaling function,fractional scaling ratio from 2:1 to 1:2, which is designed for mobile devices including tablets,laptops, monitor, etc. to support high-definition DP/eDP displays.NCS8803 supports 4-lane DP/eDP output which is typically required to support WQXGA
(2560*1600) and above at 60Hz frame rate.

Thanks to our proprietary scaling algorithm, NCS8803 provides high picture quality. All the functions pack into a small 7mm*7mmQFN56 package which saves the precious space inmobile devices.
4 Pin Diagram
（Top View）