Util包之HashMap分析
HashMap是我们用得比较多的一个集合，只要涉及到Key-Value对，基本上我们就会想到HashMap。那么HashMap又是如何实现的呢？
首先，我们知道，是有一个接口Map的，它位于java.util包下。它的源码为：
/*
* @(#)Map.java 1.56 06/04/21
*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*/
package java.util;
/**
* An object that maps keys to values. A map cannot contain duplicate keys;
* each key can map to at most one value.
*
* This interface takes the place of the Dictionary class, which
* was a totally abstract class rather than an interface.
*
*
The Map interface provides three collection views, which
* allow a map's contents to be viewed as a set of keys, collection of values,
* or set of key-value mappings. The order of a map is defined as
* the order in which the iterators on the map's collection views return their
* elements. Some map implementations, like the TreeMap class, make
* specific guarantees as to their order; others, like the HashMap
* class, do not.
*
*
Note: great care must be exercised if mutable objects are used as map
* keys. The behavior of a map is not specified if the value of an object is
* changed in a manner that affects equals comparisons while the
* object is a key in the map. A special case of this prohibition is that it
* is not permissible for a map to contain itself as a key. While it is
* permissible for a map to contain itself as a value, extreme caution is
* advised: the equals and hashCode methods are no longer
* well defined on such a map.
*
*
All general-purpose map implementation classes should provide two
* "standard" constructors: a void (no arguments) constructor which creates an
* empty map, and a constructor with a single argument of type Map,
* which creates a new map with the same key-value mappings as its argument.
* In effect, the latter constructor allows the user to copy any map,
* producing an equivalent map of the desired class. There is no way to
* enforce this recommendation (as interfaces cannot contain constructors) but
* all of the general-purpose map implementations in the JDK comply.
*
*
The "destructive" methods contained in this interface, that is, the
* methods that modify the map on which they operate, are specified to throw
* UnsupportedOperationException if this map does not support the
* operation. If this is the case, these methods may, but are not required
* to, throw an UnsupportedOperationException if the invocation would
* have no effect on the map. For example, invoking the {@link #putAll(Map)}
* method on an unmodifiable map may, but is not required to, throw the
* exception if the map whose mappings are to be "superimposed" is empty.
*
*
Some map implementations have restrictions on the keys and values they
* may contain. For example, some implementations prohibit null keys and
* values, and some have restrictions on the types of their keys. Attempting
* to insert an ineligible key or value throws an unchecked exception,
* typically NullPointerException or ClassCastException.
* Attempting to query the presence of an ineligible key or value may throw an
* exception, or it may simply return false; some implementations will exhibit
* the former behavior and some will exhibit the latter. More generally,
* attempting an operation on an ineligible key or value whose completion
* would not result in the insertion of an ineligible element into the map may
* throw an exception or it may succeed, at the option of the implementation.
* Such exceptions are marked as "optional" in the specification for this
* interface.
*
*
This interface is a member of the
*
* Java Collections Framework.
*
*
Many methods in Collections Framework interfaces are defined
* in terms of the {@link Object#equals(Object) equals} method. For
* example, the specification for the {@link #containsKey(Object)
* containsKey(Object key)} method says: "returns true if and
* only if this map contains a mapping for a key k such that
* (key==null ? k==null : key.equals(k))." This specification should
* not be construed to imply that invoking Map.containsKey
* with a non-null argument key will cause key.equals(k) to
* be invoked for any key k. Implementations are free to
* implement optimizations whereby the equals invocation is avoided,
* for example, by first comparing the hash codes of the two keys. (The
* {@link Object#hashCode()} specification guarantees that two objects with
* unequal hash codes cannot be equal.) More generally, implementations of
* the various Collections Framework interfaces are free to take advantage of
* the specified behavior of underlying {@link Object} methods wherever the
* implementor deems it appropriate.
*
* @param the type of keys maintained by this map
* @param the type of mapped values
*
* @author Josh Bloch
* @version 1.56, 04/21/06
* @see HashMap
* @see TreeMap
* @see Hashtable
* @see SortedMap
* @see Collection
* @see Set
* @since 1.2
*/
public interface Map {
// Query Operations
/**
* Returns the number of key-value mappings in this map. If the
* map contains more than Integer.MAX_VALUE elements, returns
* Integer.MAX_VALUE.
*
* @return the number of key-value mappings in this map
*/
int size();
/**
* Returns true if this map contains no key-value mappings.
*
* @return true if this map contains no key-value mappings
*/
boolean isEmpty();
/**
* Returns true if this map contains a mapping for the specified
* key. More formally, returns true if and only if
* this map contains a mapping for a key k such that
* (key==null ? k==null : key.equals(k)). (There can be
* at most one such mapping.)
*
* @param key key whose presence in this map is to be tested
* @return true if this map contains a mapping for the specified
* key
* @throws ClassCastException if the key is of an inappropriate type for
* this map (optional)
* @throws NullPointerException if the specified key is null and this map
* does not permit null keys (optional)
*/
boolean containsKey(Object key);
/**
* Returns true if this map maps one or more keys to the
* specified value. More formally, returns true if and only if
* this map contains at least one mapping to a value v such that
* (value==null ? v==null : value.equals(v)). This operation
* will probably require time linear in the map size for most
* implementations of the Map interface.
*
* @param value value whose presence in this map is to be tested
* @return true if this map maps one or more keys to the
* specified value
* @throws ClassCastException if the value is of an inappropriate type for
* this map (optional)
* @throws NullPointerException if the specified value is null and this
* map does not permit null values (optional)
*/
boolean containsValue(Object value);
/**
* Returns the value to which the specified key is mapped,
* or {@code null} if this map contains no mapping for the key.
*
* More formally, if this map contains a mapping from a key
* {@code k} to a value {@code v} such that {@code (key==null ? k==null :
* key.equals(k))}, then this method returns {@code v}; otherwise
* it returns {@code null}. (There can be at most one such mapping.)
*
*
If this map permits null values, then a return value of
* {@code null} does not necessarily indicate that the map
* contains no mapping for the key; it's also possible that the map
* explicitly maps the key to {@code null}. The {@link #containsKey
* containsKey} operation may be used to distinguish these two cases.
*
* @param key the key whose associated value is to be returned
* @return the value to which the specified key is mapped, or
* {@code null} if this map contains no mapping for the key
* @throws ClassCastException if the key is of an inappropriate type for
* this map (optional)
* @throws NullPointerException if the specified key is null and this map
* does not permit null keys (optional)
*/
V get(Object key);
// Modification Operations
/**
* Associates the specified value with the specified key in this map
* (optional operation). If the map previously contained a mapping for
* the key, the old value is replaced by the specified value. (A map
* m is said to contain a mapping for a key k if and only
* if {@link #containsKey(Object) m.containsKey(k)} would return
* true.)
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with key, or
* null if there was no mapping for key.
* (A null return can also indicate that the map
* previously associated null with key,
* if the implementation supports null values.)
* @throws UnsupportedOperationException if the put operation
* is not supported by this map
* @throws ClassCastException if the class of the specified key or value
* prevents it from being stored in this map
* @throws NullPointerException if the specified key or value is null
* and this map does not permit null keys or values
* @throws IllegalArgumentException if some property of the specified key
* or value prevents it from being stored in this map
*/
V put(K key, V value);
/**
* Removes the mapping for a key from this map if it is present
* (optional operation). More formally, if this map contains a mapping
* from key k to value v such that
* (key==null ? k==null : key.equals(k)), that mapping
* is removed. (The map can contain at most one such mapping.)
*
*
Returns the value to which this map previously associated the key,
* or null if the map contained no mapping for the key.
*
*
If this map permits null values, then a return value of
* null does not necessarily indicate that the map
* contained no mapping for the key; it's also possible that the map
* explicitly mapped the key to null.
*
*
The map will not contain a mapping for the specified key once the
* call returns.
*
* @param key key whose mapping is to be removed from the map
* @return the previous value associated with key, or
* null if there was no mapping for key.
* @throws UnsupportedOperationException if the remove operation
* is not supported by this map
* @throws ClassCastException if the key is of an inappropriate type for
* this map (optional)
* @throws NullPointerException if the specified key is null and this
* map does not permit null keys (optional)
*/
V remove(Object key);
// Bulk Operations
/**
* Copies all of the mappings from the specified map to this map
* (optional operation). The effect of this call is equivalent to that
* of calling {@link #put(Object,Object) put(k, v)} on this map once
* for each mapping from key k to value v in the
* specified map. The behavior of this operation is undefined if the
* specified map is modified while the operation is in progress.
*
* @param m mappings to be stored in this map
* @throws UnsupportedOperationException if the putAll operation
* is not supported by this map
* @throws ClassCastException if the class of a key or value in the
* specified map prevents it from being stored in this map
* @throws NullPointerException if the specified map is null, or if
* this map does not permit null keys or values, and the
* specified map contains null keys or values
* @throws IllegalArgumentException if some property of a key or value in
* the specified map prevents it from being stored in this map
*/
void putAll(Map m);
/**
* Removes all of the mappings from this map (optional operation).
* The map will be empty after this call returns.
*
* @throws UnsupportedOperationException if the clear operation
* is not supported by this map
*/
void clear();
// Views
/**
* Returns a {@link Set} view of the keys contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own remove operation), the results of
* the iteration are undefined. The set supports element removal,
* which removes the corresponding mapping from the map, via the
* Iterator.remove, Set.remove,
* removeAll, retainAll, and clear
* operations. It does not support the add or addAll
* operations.
*
* @return a set view of the keys contained in this map
*/
Set keySet();
/**
* Returns a {@link Collection} view of the values contained in this map.
* The collection is backed by the map, so changes to the map are
* reflected in the collection, and vice-versa. If the map is
* modified while an iteration over the collection is in progress
* (except through the iterator's own remove operation),
* the results of the iteration are undefined. The collection
* supports element removal, which removes the corresponding
* mapping from the map, via the Iterator.remove,
* Collection.remove, removeAll,
* retainAll and clear operations. It does not
* support the add or addAll operations.
*
* @return a collection view of the values contained in this map
*/
Collection values();
/**
* Returns a {@link Set} view of the mappings contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own remove operation, or through the
* setValue operation on a map entry returned by the
* iterator) the results of the iteration are undefined. The set
* supports element removal, which removes the corresponding
* mapping from the map, via the Iterator.remove,
* Set.remove, removeAll, retainAll and
* clear operations. It does not support the
* add or addAll operations.
*
* @return a set view of the mappings contained in this map
*/
Set> entrySet();
/**
* A map entry (key-value pair). The Map.entrySet method returns
* a collection-view of the map, whose elements are of this class. The
* only way to obtain a reference to a map entry is from the
* iterator of this collection-view. These Map.Entry objects are
* valid only for the duration of the iteration; more formally,
* the behavior of a map entry is undefined if the backing map has been
* modified after the entry was returned by the iterator, except through
* the setValue operation on the map entry.
*
* @see Map#entrySet()
* @since 1.2
*/
interface Entry {
/**
* Returns the key corresponding to this entry.
*
* @return the key corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
K getKey();
/**
* Returns the value corresponding to this entry. If the mapping
* has been removed from the backing map (by the iterator's
* remove operation), the results of this call are undefined.
*
* @return the value corresponding to this entry
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V getValue();
/**
* Replaces the value corresponding to this entry with the specified
* value (optional operation). (Writes through to the map.) The
* behavior of this call is undefined if the mapping has already been
* removed from the map (by the iterator's remove operation).
*
* @param value new value to be stored in this entry
* @return old value corresponding to the entry
* @throws UnsupportedOperationException if the put operation
* is not supported by the backing map
* @throws ClassCastException if the class of the specified value
* prevents it from being stored in the backing map
* @throws NullPointerException if the backing map does not permit
* null values, and the specified value is null
* @throws IllegalArgumentException if some property of this value
* prevents it from being stored in the backing map
* @throws IllegalStateException implementations may, but are not
* required to, throw this exception if the entry has been
* removed from the backing map.
*/
V setValue(V value);
/**
* Compares the specified object with this entry for equality.
* Returns true if the given object is also a map entry and
* the two entries represent the same mapping. More formally, two
* entries e1 and e2 represent the same mapping
* if
* (e1.getKey()==null ?
* e2.getKey()==null : e1.getKey().equals(e2.getKey())) &&
* (e1.getValue()==null ?
* e2.getValue()==null : e1.getValue().equals(e2.getValue()))
*
* This ensures that the equals method works properly across
* different implementations of the Map.Entry interface.
*
* @param o object to be compared for equality with this map entry
* @return true if the specified object is equal to this map
* entry
*/
boolean equals(Object o);
/**
* Returns the hash code value for this map entry. The hash code
* of a map entry e is defined to be:
* (e.getKey()==null ? 0 : e.getKey().hashCode()) ^
* (e.getValue()==null ? 0 : e.getValue().hashCode())
*
* This ensures that e1.equals(e2) implies that
* e1.hashCode()==e2.hashCode() for any two Entries
* e1 and e2, as required by the general
* contract of Object.hashCode.
*
* @return the hash code value for this map entry
* @see Object#hashCode()
* @see Object#equals(Object)
* @see #equals(Object)
*/
int hashCode();
}
// Comparison and hashing
/**
* Compares the specified object with this map for equality. Returns
* true if the given object is also a map and the two maps
* represent the same mappings. More formally, two maps m1 and
* m2 represent the same mappings if
* m1.entrySet().equals(m2.entrySet()). This ensures that the
* equals method works properly across different implementations
* of the Map interface.
*
* @param o object to be compared for equality with this map
* @return true if the specified object is equal to this map
*/
boolean equals(Object o);
/**
* Returns the hash code value for this map. The hash code of a map is
* defined to be the sum of the hash codes of each entry in the map's
* entrySet() view. This ensures that m1.equals(m2)
* implies that m1.hashCode()==m2.hashCode() for any two maps
* m1 and m2, as required by the general contract of
* {@link Object#hashCode}.
*
* @return the hash code value for this map
* @see Map.Entry#hashCode()
* @see Object#equals(Object)
* @see #equals(Object)
*/
int hashCode();
}
我们可以看到，它定义了一些方法。如我们经常用到的put和get方法。
诚如它上面注释的第一行所表明，Map中是不能够有重复的Key的，而且它的出现是为了取代Dictinary类。
下面我们再看一下最关心的HashMap类：
/*
* @(#)HashMap.java 1.73 07/03/13
*
* Copyright 2006 Sun Microsystems, Inc. All rights reserved.
* SUN PROPRIETARY/CONFIDENTIAL. Use is subject to license terms.
*/
package java.util;
import java.io.*;
/**
* Hash table based implementation of the Map interface. This
* implementation provides all of the optional map operations, and permits
* null values and the null key. (The HashMap
* class is roughly equivalent to Hashtable, except that it is
* unsynchronized and permits nulls.) This class makes no guarantees as to
* the order of the map; in particular, it does not guarantee that the order
* will remain constant over time.
*
* This implementation provides constant-time performance for the basic
* operations (get and put), assuming the hash function
* disperses the elements properly among the buckets. Iteration over
* collection views requires time proportional to the "capacity" of the
* HashMap instance (the number of buckets) plus its size (the number
* of key-value mappings). Thus, it's very important not to set the initial
* capacity too high (or the load factor too low) if iteration performance is
* important.
*
*
An instance of HashMap has two parameters that affect its
* performance: initial capacity and load factor. The
* capacity is the number of buckets in the hash table, and the initial
* capacity is simply the capacity at the time the hash table is created. The
* load factor is a measure of how full the hash table is allowed to
* get before its capacity is automatically increased. When the number of
* entries in the hash table exceeds the product of the load factor and the
* current capacity, the hash table is rehashed (that is, internal data
* structures are rebuilt) so that the hash table has approximately twice the
* number of buckets.
*
*
As a general rule, the default load factor (.75) offers a good tradeoff
* between time and space costs. Higher values decrease the space overhead
* but increase the lookup cost (reflected in most of the operations of the
* HashMap class, including get and put). The
* expected number of entries in the map and its load factor should be taken
* into account when setting its initial capacity, so as to minimize the
* number of rehash operations. If the initial capacity is greater
* than the maximum number of entries divided by the load factor, no
* rehash operations will ever occur.
*
*
If many mappings are to be stored in a HashMap instance,
* creating it with a sufficiently large capacity will allow the mappings to
* be stored more efficiently than letting it perform automatic rehashing as
* needed to grow the table.
*
*
Note that this implementation is not synchronized.
* If multiple threads access a hash map concurrently, and at least one of
* the threads modifies the map structurally, it must be
* synchronized externally. (A structural modification is any operation
* that adds or deletes one or more mappings; merely changing the value
* associated with a key that an instance already contains is not a
* structural modification.) This is typically accomplished by
* synchronizing on some object that naturally encapsulates the map.
*
* If no such object exists, the map should be "wrapped" using the
* {@link Collections#synchronizedMap Collections.synchronizedMap}
* method. This is best done at creation time, to prevent accidental
* unsynchronized access to the map:
* Map m = Collections.synchronizedMap(new HashMap(...));
*
* The iterators returned by all of this class's "collection view methods"
* are fail-fast: if the map is structurally modified at any time after
* the iterator is created, in any way except through the iterator's own
* remove method, the iterator will throw a
* {@link ConcurrentModificationException}. Thus, in the face of concurrent
* modification, the iterator fails quickly and cleanly, rather than risking
* arbitrary, non-deterministic behavior at an undetermined time in the
* future.
*
*
Note that the fail-fast behavior of an iterator cannot be guaranteed
* as it is, generally speaking, impossible to make any hard guarantees in the
* presence of unsynchronized concurrent modification. Fail-fast iterators
* throw ConcurrentModificationException on a best-effort basis.
* Therefore, it would be wrong to write a program that depended on this
* exception for its correctness: the fail-fast behavior of iterators
* should be used only to detect bugs.
*
*
This class is a member of the
*
* Java Collections Framework.
*
* @param the type of keys maintained by this map
* @param the type of mapped values
*
* @author Doug Lea
* @author Josh Bloch
* @author Arthur van Hoff
* @author Neal Gafter
* @version 1.73, 03/13/07
* @see Object#hashCode()
* @see Collection
* @see Map
* @see TreeMap
* @see Hashtable
* @since 1.2
*/
public class HashMap
extends AbstractMap
implements Map, Cloneable, Serializable
{
/**
* The default initial capacity - MUST be a power of two.
*/
static final int DEFAULT_INITIAL_CAPACITY = 16;
/**
* The maximum capacity, used if a higher value is implicitly specified
* by either of the constructors with arguments.
* MUST be a power of two <= 1<<30.
*/
static final int MAXIMUM_CAPACITY = 1 << 30;
/**
* The load factor used when none specified in constructor.
*/
static final float DEFAULT_LOAD_FACTOR = 0.75f;
/**
* The table, resized as necessary. Length MUST Always be a power of two.
*/
transient Entry[] table;
/**
* The number of key-value mappings contained in this map.
*/
transient int size;
/**
* The next size value at which to resize (capacity * load factor).
* @serial
*/
int threshold;
/**
* The load factor for the hash table.
*
* @serial
*/
final float loadFactor;
/**
* The number of times this HashMap has been structurally modified
* Structural modifications are those that change the number of mappings in
* the HashMap or otherwise modify its internal structure (e.g.,
* rehash). This field is used to make iterators on Collection-views of
* the HashMap fail-fast. (See ConcurrentModificationException).
*/
transient volatile int modCount;
/**
* Constructs an empty HashMap with the specified initial
* capacity and load factor.
*
* @param initialCapacity the initial capacity
* @param loadFactor the load factor
* @throws IllegalArgumentException if the initial capacity is negative
* or the load factor is nonpositive
*/
public HashMap(int initialCapacity, float loadFactor) {
if (initialCapacity < 0)
throw new IllegalArgumentException("Illegal initial capacity: " +
initialCapacity);
if (initialCapacity > MAXIMUM_CAPACITY)
initialCapacity = MAXIMUM_CAPACITY;
if (loadFactor <= 0 || Float.isNaN(loadFactor))
throw new IllegalArgumentException("Illegal load factor: " +
loadFactor);
// Find a power of 2 >= initialCapacity
int capacity = 1;
while (capacity < initialCapacity)
capacity <<= 1;
this.loadFactor = loadFactor;
threshold = (int)(capacity * loadFactor);
table = new Entry[capacity];
init();
}
/**
* Constructs an empty HashMap with the specified initial
* capacity and the default load factor (0.75).
*
* @param initialCapacity the initial capacity.
* @throws IllegalArgumentException if the initial capacity is negative.
*/
public HashMap(int initialCapacity) {
this(initialCapacity, DEFAULT_LOAD_FACTOR);
}
/**
* Constructs an empty HashMap with the default initial capacity
* (16) and the default load factor (0.75).
*/
public HashMap() {
this.loadFactor = DEFAULT_LOAD_FACTOR;
threshold = (int)(DEFAULT_INITIAL_CAPACITY * DEFAULT_LOAD_FACTOR);
table = new Entry[DEFAULT_INITIAL_CAPACITY];
init();
}
/**
* Constructs a new HashMap with the same mappings as the
* specified Map. The HashMap is created with
* default load factor (0.75) and an initial capacity sufficient to
* hold the mappings in the specified Map.
*
* @param m the map whose mappings are to be placed in this map
* @throws NullPointerException if the specified map is null
*/
public HashMap(Map m) {
this(Math.max((int) (m.size() / DEFAULT_LOAD_FACTOR) + 1,
DEFAULT_INITIAL_CAPACITY), DEFAULT_LOAD_FACTOR);
putAllForCreate(m);
}
// internal utilities
/**
* Initialization hook for subclasses. This method is called
* in all constructors and pseudo-constructors (clone, readObject)
* after HashMap has been initialized but before any entries have
* been inserted. (In the absence of this method, readObject would
* require explicit knowledge of subclasses.)
*/
void init() {
}
/**
* Applies a supplemental hash function to a given hashCode, which
* defends against poor quality hash functions. This is critical
* because HashMap uses power-of-two length hash tables, that
* otherwise encounter collisions for hashCodes that do not differ
* in lower bits. Note: Null keys always map to hash 0, thus index 0.
*/
static int hash(int h) {
// This function ensures that hashCodes that differ only by
// constant multiples at each bit position have a bounded
// number of collisions (approximately 8 at default load factor).
h ^= (h >>> 20) ^ (h >>> 12);
return h ^ (h >>> 7) ^ (h >>> 4);
}
/**
* Returns index for hash code h.
*/
static int indexFor(int h, int length) {
return h & (length-1);
}
/**
* Returns the number of key-value mappings in this map.
*
* @return the number of key-value mappings in this map
*/
@Override
public int size() {
return size;
}
/**
* Returns true if this map contains no key-value mappings.
*
* @return true if this map contains no key-value mappings
*/
@Override
public boolean isEmpty() {
return size == 0;
}
/**
* Returns the value to which the specified key is mapped,
* or {@code null} if this map contains no mapping for the key.
*
* More formally, if this map contains a mapping from a key
* {@code k} to a value {@code v} such that {@code (key==null ? k==null :
* key.equals(k))}, then this method returns {@code v}; otherwise
* it returns {@code null}. (There can be at most one such mapping.)
*
*
A return value of {@code null} does not necessarily
* indicate that the map contains no mapping for the key; it's also
* possible that the map explicitly maps the key to {@code null}.
* The {@link #containsKey containsKey} operation may be used to
* distinguish these two cases.
*
* @see #put(Object, Object)
*/
@Override
public V get(Object key) {
if (key == null)
return getForNullKey();
int hash = hash(key.hashCode());
for (Entry e = table[indexFor(hash, table.length)];
e != null;
e = e.next) {
Object k;
if (e.hash == hash && ((k = e.key) == key || key.equals(k)))
return e.value;
}
return null;
}
/**
* Offloaded version of get() to look up null keys. Null keys map
* to index 0. This null case is split out into separate methods
* for the sake of performance in the two most commonly used
* operations (get and put), but incorporated with conditionals in
* others.
*/
private V getForNullKey() {
for (Entry e = table[0]; e != null; e = e.next) {
if (e.key == null)
return e.value;
}
return null;
}
/**
* Returns true if this map contains a mapping for the
* specified key.
*
* @param key The key whose presence in this map is to be tested
* @return true if this map contains a mapping for the specified
* key.
*/
@Override
public boolean containsKey(Object key) {
return getEntry(key) != null;
}
/**
* Returns the entry associated with the specified key in the
* HashMap. Returns null if the HashMap contains no mapping
* for the key.
*/
final Entry getEntry(Object key) {
int hash = (key == null) ? 0 : hash(key.hashCode());
for (Entry e = table[indexFor(hash, table.length)];
e != null;
e = e.next) {
Object k;
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k))))
return e;
}
return null;
}
/**
* Associates the specified value with the specified key in this map.
* If the map previously contained a mapping for the key, the old
* value is replaced.
*
* @param key key with which the specified value is to be associated
* @param value value to be associated with the specified key
* @return the previous value associated with key, or
* null if there was no mapping for key.
* (A null return can also indicate that the map
* previously associated null with key.)
*/
@Override
public V put(K key, V value) {
if (key == null)
return putForNullKey(value);
int hash = hash(key.hashCode());
int i = indexFor(hash, table.length);
for (Entry e = table[i]; e != null; e = e.next) {
Object k;
if (e.hash == hash && ((k = e.key) == key || key.equals(k))) {
V oldValue = e.value;
e.value = value;
e.recordAccess(this);
return oldValue;
}
}
modCount++;
addEntry(hash, key, value, i);
return null;
}
/**
* Offloaded version of put for null keys
*/
private V putForNullKey(V value) {
for (Entry e = table[0]; e != null; e = e.next) {
if (e.key == null) {
V oldValue = e.value;
e.value = value;
e.recordAccess(this);
return oldValue;
}
}
modCount++;
addEntry(0, null, value, 0);
return null;
}
/**
* This method is used instead of put by constructors and
* pseudoconstructors (clone, readObject). It does not resize the table,
* check for comodification, etc. It calls createEntry rather than
* addEntry.
*/
private void putForCreate(K key, V value) {
int hash = (key == null) ? 0 : hash(key.hashCode());
int i = indexFor(hash, table.length);
/**
* Look for preexisting entry for key. This will never happen for
* clone or deserialize. It will only happen for construction if the
* input Map is a sorted map whose ordering is inconsistent w/ equals.
*/
for (Entry e = table[i]; e != null; e = e.next) {
Object k;
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k)))) {
e.value = value;
return;
}
}
createEntry(hash, key, value, i);
}
private void putAllForCreate(Map m) {
for (Iterator> i = m.entrySet().iterator(); i.hasNext(); ) {
Map.Entry e = i.next();
putForCreate(e.getKey(), e.getValue());
}
}
/**
* Rehashes the contents of this map into a new array with a
* larger capacity. This method is called automatically when the
* number of keys in this map reaches its threshold.
*
* If current capacity is MAXIMUM_CAPACITY, this method does not
* resize the map, but sets threshold to Integer.MAX_VALUE.
* This has the effect of preventing future calls.
*
* @param newCapacity the new capacity, MUST be a power of two;
* must be greater than current capacity unless current
* capacity is MAXIMUM_CAPACITY (in which case value
* is irrelevant).
*/
void resize(int newCapacity) {
Entry[] oldTable = table;
int oldCapacity = oldTable.length;
if (oldCapacity == MAXIMUM_CAPACITY) {
threshold = Integer.MAX_VALUE;
return;
}
Entry[] newTable = new Entry[newCapacity];
transfer(newTable);
table = newTable;
threshold = (int)(newCapacity * loadFactor);
}
/**
* Transfers all entries from current table to newTable.
*/
void transfer(Entry[] newTable) {
Entry[] src = table;
int newCapacity = newTable.length;
for (int j = 0; j < src.length; j++) {
Entry e = src[j];
if (e != null) {
src[j] = null;
do {
Entry next = e.next;
int i = indexFor(e.hash, newCapacity);
e.next = newTable[i];
newTable[i] = e;
e = next;
} while (e != null);
}
}
}
/**
* Copies all of the mappings from the specified map to this map.
* These mappings will replace any mappings that this map had for
* any of the keys currently in the specified map.
*
* @param m mappings to be stored in this map
* @throws NullPointerException if the specified map is null
*/
@Override
public void putAll(Map m) {
int numKeysToBeAdded = m.size();
if (numKeysToBeAdded == 0)
return;
/*
* Expand the map if the map if the number of mappings to be added
* is greater than or equal to threshold. This is conservative; the
* obvious condition is (m.size() + size) >= threshold, but this
* condition could result in a map with twice the appropriate capacity,
* if the keys to be added overlap with the keys already in this map.
* By using the conservative calculation, we subject ourself
* to at most one extra resize.
*/
if (numKeysToBeAdded > threshold) {
int targetCapacity = (int)(numKeysToBeAdded / loadFactor + 1);
if (targetCapacity > MAXIMUM_CAPACITY)
targetCapacity = MAXIMUM_CAPACITY;
int newCapacity = table.length;
while (newCapacity < targetCapacity)
newCapacity <<= 1;
if (newCapacity > table.length)
resize(newCapacity);
}
for (Iterator> i = m.entrySet().iterator(); i.hasNext(); ) {
Map.Entry e = i.next();
put(e.getKey(), e.getValue());
}
}
/**
* Removes the mapping for the specified key from this map if present.
*
* @param key key whose mapping is to be removed from the map
* @return the previous value associated with key, or
* null if there was no mapping for key.
* (A null return can also indicate that the map
* previously associated null with key.)
*/
@Override
public V remove(Object key) {
Entry e = removeEntryForKey(key);
return (e == null ? null : e.value);
}
/**
* Removes and returns the entry associated with the specified key
* in the HashMap. Returns null if the HashMap contains no mapping
* for this key.
*/
final Entry removeEntryForKey(Object key) {
int hash = (key == null) ? 0 : hash(key.hashCode());
int i = indexFor(hash, table.length);
Entry prev = table[i];
Entry e = prev;
while (e != null) {
Entry next = e.next;
Object k;
if (e.hash == hash &&
((k = e.key) == key || (key != null && key.equals(k)))) {
modCount++;
size--;
if (prev == e)
table[i] = next;
else
prev.next = next;
e.recordRemoval(this);
return e;
}
prev = e;
e = next;
}
return e;
}
/**
* Special version of remove for EntrySet.
*/
final Entry removeMapping(Object o) {
if (!(o instanceof Map.Entry))
return null;
Map.Entry entry = (Map.Entry) o;
Object key = entry.getKey();
int hash = (key == null) ? 0 : hash(key.hashCode());
int i = indexFor(hash, table.length);
Entry prev = table[i];
Entry e = prev;
while (e != null) {
Entry next = e.next;
if (e.hash == hash && e.equals(entry)) {
modCount++;
size--;
if (prev == e)
table[i] = next;
else
prev.next = next;
e.recordRemoval(this);
return e;
}
prev = e;
e = next;
}
return e;
}
/**
* Removes all of the mappings from this map.
* The map will be empty after this call returns.
*/
@Override
public void clear() {
modCount++;
Entry[] tab = table;
for (int i = 0; i < tab.length; i++)
tab[i] = null;
size = 0;
}
/**
* Returns true if this map maps one or more keys to the
* specified value.
*
* @param value value whose presence in this map is to be tested
* @return true if this map maps one or more keys to the
* specified value
*/
@Override
public boolean containsValue(Object value) {
if (value == null)
return containsNullValue();
Entry[] tab = table;
for (int i = 0; i < tab.length ; i++)
for (Entry e = tab[i] ; e != null ; e = e.next)
if (value.equals(e.value))
return true;
return false;
}
/**
* Special-case code for containsValue with null argument
*/
private boolean containsNullValue() {
Entry[] tab = table;
for (int i = 0; i < tab.length ; i++)
for (Entry e = tab[i] ; e != null ; e = e.next)
if (e.value == null)
return true;
return false;
}
/**
* Returns a shallow copy of this HashMap instance: the keys and
* values themselves are not cloned.
*
* @return a shallow copy of this map
*/
@Override
public Object clone() {
HashMap result = null;
try {
result = (HashMap)super.clone();
} catch (CloneNotSupportedException e) {
// assert false;
}
result.table = new Entry[table.length];
result.entrySet = null;
result.modCount = 0;
result.size = 0;
result.init();
result.putAllForCreate(this);
return result;
}
static class Entry implements Map.Entry {
final K key;
V value;
Entry next;
final int hash;
/**
* Creates new entry.
*/
Entry(int h, K k, V v, Entry n) {
value = v;
next = n;
key = k;
hash = h;
}
public final K getKey() {
return key;
}
public final V getValue() {
return value;
}
public final V setValue(V newValue) {
V oldValue = value;
value = newValue;
return oldValue;
}
@Override
public final boolean equals(Object o) {
if (!(o instanceof Map.Entry))
return false;
Map.Entry e = (Map.Entry)o;
Object k1 = getKey();
Object k2 = e.getKey();
if (k1 == k2 || (k1 != null && k1.equals(k2))) {
Object v1 = getValue();
Object v2 = e.getValue();
if (v1 == v2 || (v1 != null && v1.equals(v2)))
return true;
}
return false;
}
@Override
public final int hashCode() {
return (key==null ? 0 : key.hashCode()) ^
(value==null ? 0 : value.hashCode());
}
@Override
public final String toString() {
return getKey() + "=" + getValue();
}
/**
* This method is invoked whenever the value in an entry is
* overwritten by an invocation of put(k,v) for a key k that's already
* in the HashMap.
*/
void recordAccess(HashMap m) {
}
/**
* This method is invoked whenever the entry is
* removed from the table.
*/
void recordRemoval(HashMap m) {
}
}
/**
* Adds a new entry with the specified key, value and hash code to
* the specified bucket. It is the responsibility of this
* method to resize the table if appropriate.
*
* Subclass overrides this to alter the behavior of put method.
*/
void addEntry(int hash, K key, V value, int bucketIndex) {
Entry e = table[bucketIndex];
table[bucketIndex] = new Entry(hash, key, value, e);
if (size++ >= threshold)
resize(2 * table.length);
}
/**
* Like addEntry except that this version is used when creating entries
* as part of Map construction or "pseudo-construction" (cloning,
* deserialization). This version needn't worry about resizing the table.
*
* Subclass overrides this to alter the behavior of HashMap(Map),
* clone, and readObject.
*/
void createEntry(int hash, K key, V value, int bucketIndex) {
Entry e = table[bucketIndex];
table[bucketIndex] = new Entry(hash, key, value, e);
size++;
}
private abstract class HashIterator implements Iterator {
Entry next; // next entry to return
int expectedModCount; // For fast-fail
int index; // current slot
Entry current; // current entry
HashIterator() {
expectedModCount = modCount;
if (size > 0) { // advance to first entry
Entry[] t = table;
while (index < t.length && (next = t[index++]) == null)
;
}
}
public final boolean hasNext() {
return next != null;
}
final Entry nextEntry() {
if (modCount != expectedModCount)
throw new ConcurrentModificationException();
Entry e = next;
if (e == null)
throw new NoSuchElementException();
if ((next = e.next) == null) {
Entry[] t = table;
while (index < t.length && (next = t[index++]) == null)
;
}
current = e;
return e;
}
public void remove() {
if (current == null)
throw new IllegalStateException();
if (modCount != expectedModCount)
throw new ConcurrentModificationException();
Object k = current.key;
current = null;
HashMap.this.removeEntryForKey(k);
expectedModCount = modCount;
}
}
private final class ValueIterator extends HashIterator {
public V next() {
return nextEntry().value;
}
}
private final class KeyIterator extends HashIterator {
public K next() {
return nextEntry().getKey();
}
}
private final class EntryIterator extends HashIterator> {
public Map.Entry next() {
return nextEntry();
}
}
// Subclass overrides these to alter behavior of views' iterator() method
Iterator newKeyIterator() {
return new KeyIterator();
}
Iterator newValueIterator() {
return new ValueIterator();
}
Iterator> newEntryIterator() {
return new EntryIterator();
}
// Views
private transient Set> entrySet = null;
/**
* Returns a {@link Set} view of the keys contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own remove operation), the results of
* the iteration are undefined. The set supports element removal,
* which removes the corresponding mapping from the map, via the
* Iterator.remove, Set.remove,
* removeAll, retainAll, and clear
* operations. It does not support the add or addAll
* operations.
*/
@Override
public Set keySet() {
Set ks = keySet;
return (ks != null ? ks : (keySet = new KeySet()));
}
private final class KeySet extends AbstractSet {
@Override
public Iterator iterator() {
return newKeyIterator();
}
@Override
public int size() {
return size;
}
@Override
public boolean contains(Object o) {
return containsKey(o);
}
@Override
public boolean remove(Object o) {
return HashMap.this.removeEntryForKey(o) != null;
}
@Override
public void clear() {
HashMap.this.clear();
}
}
/**
* Returns a {@link Collection} view of the values contained in this map.
* The collection is backed by the map, so changes to the map are
* reflected in the collection, and vice-versa. If the map is
* modified while an iteration over the collection is in progress
* (except through the iterator's own remove operation),
* the results of the iteration are undefined. The collection
* supports element removal, which removes the corresponding
* mapping from the map, via the Iterator.remove,
* Collection.remove, removeAll,
* retainAll and clear operations. It does not
* support the add or addAll operations.
*/
@Override
public Collection values() {
Collection vs = values;
return (vs != null ? vs : (values = new Values()));
}
private final class Values extends AbstractCollection {
@Override
public Iterator iterator() {
return newValueIterator();
}
@Override
public int size() {
return size;
}
@Override
public boolean contains(Object o) {
return containsValue(o);
}
@Override
public void clear() {
HashMap.this.clear();
}
}
/**
* Returns a {@link Set} view of the mappings contained in this map.
* The set is backed by the map, so changes to the map are
* reflected in the set, and vice-versa. If the map is modified
* while an iteration over the set is in progress (except through
* the iterator's own remove operation, or through the
* setValue operation on a map entry returned by the
* iterator) the results of the iteration are undefined. The set
* supports element removal, which removes the corresponding
* mapping from the map, via the Iterator.remove,
* Set.remove, removeAll, retainAll and
* clear operations. It does not support the
* add or addAll operations.
*
* @return a set view of the mappings contained in this map
*/
@Override
public Set> entrySet() {
return entrySet0();
}
private Set> entrySet0() {
Set> es = entrySet;
return es != null ? es : (entrySet = new EntrySet());
}
private final class EntrySet extends AbstractSet> {
@Override
public Iterator> iterator() {
return newEntryIterator();
}
@Override
public boolean contains(Object o) {
if (!(o instanceof Map.Entry))
return false;
Map.Entry e = (Map.Entry) o;
Entry candidate = getEntry(e.getKey());
return candidate != null && candidate.equals(e);
}
@Override
public boolean remove(Object o) {
return removeMapping(o) != null;
}
@Override
public int size() {
return size;
}
@Override
public void clear() {
HashMap.this.clear();
}
}
/**
* Save the state of the HashMap instance to a stream (i.e.,
* serialize it).
*
* @serialData The capacity of the HashMap (the length of the
* bucket array) is emitted (int), followed by the
* size (an int, the number of key-value
* mappings), followed by the key (Object) and value (Object)
* for each key-value mapping. The key-value mappings are
* emitted in no particular order.
*/
private void writeObject(java.io.ObjectOutputStream s)
throws IOException
{
Iterator> i =
(size > 0) ? entrySet0().iterator() : null;
// Write out the threshold, loadfactor, and any hidden stuff
s.defaultWriteObject();
// Write out number of buckets
s.writeInt(table.length);
// Write out size (number of Mappings)
s.writeInt(size);
// Write out keys and values (alternating)
if (i != null) {
while (i.hasNext()) {
Map.Entry e = i.next();
s.writeObject(e.getKey());
s.writeObject(e.getValue());
}
}
}
private static final long serialVersionUID = 362498820763181265L;
/**
* Reconstitute the HashMap instance from a stream (i.e.,
* deserialize it).
*/
private void readObject(java.io.ObjectInputStream s)
throws IOException, ClassNotFoundException
{
// Read in the threshold, loadfactor, and any hidden stuff
s.defaultReadObject();
// Read in number of buckets and allocate the bucket array;
int numBuckets = s.readInt();
table = new Entry[numBuckets];
init(); // Give subclass a chance to do its thing.
// Read in size (number of Mappings)
int size = s.readInt();
// Read the keys and values, and put the mappings in the HashMap
for (int i=0; i
HashMap中有以下几个属性：
static final int DEFAULT_INITIAL_CAPACITY = 16;//默认初始化大小
static final int MAXIMUM_CAPACITY = 1 << 30;//最大的大小
static final float DEFAULT_LOAD_FACTOR = 0.75f;
transient Entry[] table;//关键，存放键值对的地方
transient int size;//存放的键值对的数目
int threshold;
final float loadFactor;
transient volatile int modCount;
看完了属性，我们下面看构造方法：
//传入初始大小和loadFactor(感觉loadFactor是Resize用的)的构造方法
public HashMap(int initialCapacity, float loadFactor) {
//初始化大小小于0，抛出异常
if (initialCapacity < 0)
throw new IllegalArgumentException("Illegal initial capacity: " +
initialCapacity);
//初始化大小太大，修正
if (initialCapacity > MAXIMUM_CAPACITY)
initialCapacity = MAXIMUM_CAPACITY;
//判断loadFactor是否合法
if (loadFactor <= 0 || Float.isNaN(loadFactor))
throw new IllegalArgumentException("Illegal load factor: " +
loadFactor);
// Find a power of 2 >= initialCapacity
//初始化hashTable的大小是大于等于传入初始化大小，且是2的N次方
int capacity = 1;
while (capacity < initialCapacity)
capacity <<= 1;
this.loadFactor = loadFactor;
threshold = (int)(capacity * loadFactor);
table = new Entry[capacity];
init();
}
另一种：
public HashMap(int initialCapacity) {
this(initialCapacity, DEFAULT_LOAD_FACTOR);
}
这个不必多言，没有loadFactor就使用默认的loadFactor。
第三种：
public HashMap() {
this.loadFactor = DEFAULT_LOAD_FACTOR;
threshold = (int)(DEFAULT_INITIAL_CAPACITY * DEFAULT_LOAD_FACTOR);
table = new Entry[DEFAULT_INITIAL_CAPACITY];
init();
}
完全使用默认的各个参数进行初始化。
第四种：
public HashMap(Map m) {
this(Math.max((int) (m.size() / DEFAULT_LOAD_FACTOR) + 1,
DEFAULT_INITIAL_CAPACITY), DEFAULT_LOAD_FACTOR);
putAllForCreate(m);
}
用Map初始化。putAllForCreate是首先遍历传入的m,得到每个元素的key和value。然后再根据hash(key)对key进行散列，再在table中找到其散列的位置，判断其是否存在，如果存在，就return;如果不存在，则将其加入table中。
再来看我们最熟悉的put方法：
@Override
public V put(K key, V value) {
if (key == null)
return putForNullKey(value);
int hash = hash(key.hashCode());
int i = indexFor(hash, table.length);
for (Entry e = table[i]; e != null; e = e.next) {
Object k;
if (e.hash == hash && ((k = e.key) == key || key.equals(k))) {
V oldValue = e.value;
e.value = value;
e.recordAccess(this);
return oldValue;
}
}
modCount++;
addEntry(hash, key, value, i);
return null;
} 再插入Key/Value对前，先对Key进行散列，并且查询此Key是否存在。如果不存在，那么调用addEntry方法，将Entry加入table。
与之相同，get方法，用hash找到其在table中的位置后，再根据Entry之间的链接，找到Key对应的Value。
@Override
public V get(Object key) {
if (key == null)
return getForNullKey();
int hash = hash(key.hashCode());
for (Entry e = table[indexFor(hash, table.length)];
e != null;
e = e.next) {
Object k;
if (e.hash == hash && ((k = e.key) == key || key.equals(k)))
return e.value;
}
return null;
} 这里需要说明的一点，两个不同Key的hash之后的值也许相同，这样就产生了散列冲突。解决冲突有两种方法：1.冲突再散列，如线性探测，平方探测；2.利用链表，即hash同一值的Entry组成个链表。JDK中的HashTable用的就是第二种方法。
故利用hash key找到在table中的位置后，还需与对应这个位置的链表中的Entry逐个的比对Key值，这样才能将最终确定的value进行返回。
这样，我们就将HashMap的精华部分读完了。