mysqld_multi 配置MySQL多实例

今天应朋友要求做个mysqld_multi 配置MySQL多实例 ，这东西我也没有接触过，所以在百度搜到了一博客文章，对着上面做了下实验，成功完成。

博客出处：http://chenzehe.iteye.com/blog/1266260

 

1、下载MySQL源码安装版本

     到MySQL官网查找到相应版本下载，本文下载的是5.1版本

1. wget -c ftp://ftp.mirrorservice.org/sites/ftp.mysql.com/Downloads/MySQL-5.1/mysql-5.1.60.tar.gz  

2、解压安装：

tar -zxv -f mysql-5.1.60.tar.gz

./configure --prefix=/usr/local/mysql --with-charset=utf8
--with-extra-charset=all --enable-thread-safe-client --enable-assembler
--with-readline --with-big-tables
--with-named-curses-libs=/usr/lib/libncursesw.so.5

make && make install

3、添加用户和用户组：

1. groupadd mysql #添加mysql用户组   
2. useradd -g mysql mysql #创建mysql用户并把它放到mysql组下   
3. chown -R root:mysql /usr/local/mysql #修改mysql文件属性

4、初始化数据目录：

#把用到的工具添加到/usr/bin目录
ln -s /usr/local/mysql/bin/mysqld_multi /usr/bin/mysqld_multi
ln -s /usr/local/mysql/bin/mysql_install_db /usr/bin/mysql_install_db

#初始化四个数据目录
mysql_install_db --datadir=/usr/local/var/mysql1 --user=mysql
mysql_install_db --datadir=/usr/local/var/mysql2 --user=mysql
mysql_install_db --datadir=/usr/local/var/mysql3 --user=mysql
mysql_install_db --datadir=/usr/local/var/mysql4 --user=mysql

#修改属性
chown -R mysql /usr/local/var/mysql1
chown -R mysql /usr/local/var/mysql2
chown -R mysql /usr/local/var/mysql3
chown -R mysql /usr/local/var/mysql4

5、配置多实例启动脚本：

    从MySQL的源码中把复制到/etc/init.d/目录下

cp /usr/local/src/mysql-5.1.60/support-files/mysqld_multi.server /etc/init.d/mysqld_multi.server

#修改basedir和bindir为安装路径
basedir=/usr/local/mysql
bindir=/usr/local/mysql/bin

6、配置多实例数据库配置文件

     用mysqld_multi工具查看该配置文件的模板方法，命令为：mysqld_multi --example

     在/etc/目录下创建创建文件/etc/mysqld_multi.cnf，把mysqld_multi --example产生的文件粘进去，修改相应属性，如：mysqld,mysqladmin,socket,port,pid-file,datadir,user等。

[mysqld_multi]
mysqld     = /usr/local/mysql/bin/mysqld_safe
mysqladmin = /usr/local/mysql/bin/mysqladmin
#user       = mysql
#password   = my_password

[mysqld1]
socket     = /usr/local/var/mysql1/mysql1.sock
port       = 3306
pid-file   = /usr/local/var/mysql1/mysql1.pid
datadir    = /usr/local/var/mysql1
#language   = /usr/local/mysql/share/mysql/english
user       = mysql

[mysqld2]
socket     = /usr/local/var/mysql2/mysql2.sock
port       = 3307
pid-file   = /usr/local/var/mysql2/mysql2.pid
datadir    = /usr/local/var/mysql2
#language   = /usr/local/mysql/share/mysql/english
user       = mysql

[mysqld3]
socket     = /usr/local/var/mysql3/mysql3.sock
port       = 3308
pid-file   = /usr/local/var/mysql3/mysql3.pid
datadir    = /usr/local/var/mysql3
#language   = /usr/local/mysql/share/mysql/english
user       = mysql

[mysqld4]
socket     = /usr/local/var/mysql4/mysql4.sock
port       = 3309
pid-file   = /usr/local/var/mysql4/mysql4.pid
datadir    = /usr/local/var/mysql4
#language   = /usr/local/mysql/share/mysql/english
user       = mysql

将/usr/local/mysql/bin加到$PATH环境变量里
export PATH=/usr/local/mysql/bin:$PATH

#查看数据库状态
mysqld_multi --defaults-extra-file=/etc/mysqld_multi.cnf report
#结果都为没有运行
Reporting MySQL servers
MySQL server from group: mysqld1 is not running
MySQL server from group: mysqld2 is not running
MySQL server from group: mysqld3 is not running
MySQL server from group: mysqld4 is not running

#启动
mysqld_multi --defaults-extra-file=/etc/mysqld_multi.cnf start
#结果为
Reporting MySQL servers
MySQL server from group: mysqld1 is not running
MySQL server from group: mysqld2 is not running
MySQL server from group: mysqld3 is not running
MySQL server from group: mysqld4 is not running

#启动具体某一个实例可在start、stop后面加上具体数据1,2,3等

8、查看运行结果：

1. #查看相应端口是否已经被监听   
2. netstat -tunlp   
3.   
4. #查看是否有活动进程   
5. ps -aux|grep mysql

9、登录相应数据库：

1. #进入端口为3306的数据库   
2. mysql -uroot -p -h127.0.0.1 -P3306   
3.   
4. #通过sock文件登录   
5. mysql -uroot -p -S /usr/local/var/mysql1/mysql1.sock   
6.   
7.  #查看socket文件   
8. mysql> SHOW VARIABLES LIKE 'socket';   
9.   
10. #查看pid文件   
11. mysql> SHOW VARIABLES LIKE '%pid%';