Ubuntu 10.04编译安装CodeBlocks 10.5

执行如下命令：

 1  svn checkout http://svn.berlios.de/svnroot/repos/codeblocks/trunk
    6  sudo apt-get install build-essential
    9  sudo apt-get install gdb
   10  sudo apt-get install libwxgtk2.8-0 libwxgtk2.8-dev wx2.8-headers wx-common -y
   11  sudo update-alternatives --config wx-config
   12  sudo apt-get install libgtk2.0-dev
   13  sudo apt-get install libtool

进入CodeBlocks源代码目录：

   15  ./bootstrap
   16  ./configure
遇到如下问题：

jelly@jelly-desktop:~/Programming/tools/CodeBlocks/svn/trunk$ ./bootstrap
./update_revision.sh: 50: dch: not found
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
libtoolize: You should add the contents of the following files to `aclocal.m4':
libtoolize:   `/usr/share/aclocal/libtool.m4'
libtoolize:   `/usr/share/aclocal/ltoptions.m4'
libtoolize:   `/usr/share/aclocal/ltversion.m4'
libtoolize:   `/usr/share/aclocal/ltsugar.m4'
libtoolize:   `/usr/share/aclocal/lt~obsolete.m4'
libtoolize: Consider adding `AC_CONFIG_MACRO_DIR([m4])' to configure.in and
libtoolize: rerunning libtoolize, to keep the correct libtool macros in-tree.
libtoolize: Consider adding `-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
./bootstrap: 67: aclocal: not found
jelly@jelly-desktop:~/Programming/tools/CodeBlocks/svn/trunk$
jelly@jelly-desktop:~/Programming/tools/CodeBlocks/svn/trunk$ ./configure
bash: ./configure: 没有那个文件或目录

解决办法：

这是没有安装autoconf导致的。

运行下面命令安装autoconf：
sudo apt-get install autoconf

然后再执行：

./bootstrap
./configure
make && sudo make install

编译时间较长，喝杯茶慢慢等一下就安装成功咯。