ipmitool java版本_IPMITool使用

内核模块

加载 ipmi_devintf 和 ipmi_si 后，会生成 /dev/ipmi0。

ps: 获取传感器信息请安装 lm-sensors，然后运行 sensors-detect。

常见ipmitool

$ ipmitool bmc reset cold #Reset BMC/DRAC to default

$ ipmitool –I open bmc info #check BMC info

$ ipmitool sel #check SEL log

$ ipmitool sel list #list SEL log

$ ipmitool raw 0x34 0x11 #Check which node you are in [For Dell Cloud edge]

$ ipmitool lan set 1 ipsrc static #Set BMC/DRAC static IP

$ ipmitool lan set 1 ipaddr #Set BMC/DRAC IP Address

$ ipmitool lan set 1 netmask #Set BMC/DRAC Subnet Mask

$ ipmitool lan set 1 defgw ipaddr #Set BMC/DRAC Default Gateway

$ ipmitool lan set 1 defgw macaddr 00:0e:0c:aa:8e:13 #Set BMC/DRAC Default Gateway mac address

$ ipmitool lan set 1 arp respond on #Enable arp

$ ipmitool lan set 1 auth ADMIN MD5 #Enable auth

$ ipmitool lan set 1 access on #allow access

$ ipmitool user set name 2 admin #create admin

$ ipmitool user set password 2 #set password

$ ipmitool channel setaccess 1 2 link=on ipmi=on callin=on privilege=2 #set user access permission

$ ipmitool user enable 2 #Enable user

$ ipmitool channel getaccess 1 2 #set channel

$ ipmitool raw 0x30 0x24 2 #Change the NIC settings to dedicated

$ ipmitool raw 0x30 0x24 0 #Change the NIC settings to shared

$ ipmitool raw 0x30 0x25 #Check the NIC settings[Output of 00 means shared and 02 means dedicated]

$ ipmitool mc reset warm #Restart the BMC/DRAC

$ ipmitool -I open sensor #read sensor data

$ ipmitool sunoem fan speed 100 #set fan speed