使用CMD为单个网卡添加多个IP

无线网卡:

netsh interface ip set address name="WLAN" source=static addr=192.168.100.249 mask=255.255.255.0 gateway=192.168.100.1 gwmetric=1
netsh interface ip add address name="WLAN" addr=192.168.110.249 mask=255.255.255.0 gateway=192.168.110.1 gwmetric=1
netsh interface ip add address name="WLAN" addr=192.168.3.249 mask=255.255.255.0 gateway=192.168.3.1 gwmetric=1

有线网卡:

netsh interface ip set address name="以太网" source=static addr=192.168.100.249 mask=255.255.255.0 gateway=192.168.100.1 gwmetric=1
netsh interface ip add address name="以太网" addr=192.168.110.249 mask=255.255.255.0 gateway=192.168.110.1 gwmetric=1
netsh interface ip add address name="以太网" addr=192.168.3.249 mask=255.255.255.0 gateway=192.168.3.1 gwmetric=1

最后,加上DNS

netsh interface ip set dns name="WALN" source=static addr=119.29.29.29 register=primary
netsh interface ip add dns name="WLAN" source=static addr=114.114.114.114 index=2
netsh interface ip set dns name="以太网" source=static addr=119.29.29.29 register=primary
netsh interface ip add dns name="以太网" source=static addr=114.114.114.114 index=2

恢复DHCP获取

netsh interface ip set address name="WLAN" source=dhcp
netsh interface ip set address name="以太网" source=dhcp
netsh interface ip set address name="WLAN" source=dhcp
netsh interface ip set address name="以太网" source=dhcp

你可能感兴趣的:(Windows相关,tcp/ip,网络,windows)