NX二次开发-UFUN获取投影曲线里的曲线UF_CURVE_ask_proj_curves

NX二次开发-UFUN获取投影曲线里的曲线UF_CURVE_ask_proj_curves

NX11+VS2013

#include 
#include 
#include 
#include 




UF_initialize();

//创建四条直线
UF_CURVE_line_t Line_coords1;
Line_coords1.start_point[0] = 0.0;
Line_coords1.start_point[1] = 0.0;
Line_coords1.start_point[2] = 0.0;
Line_coords1.end_point[0] = 10.0;
Line_coords1.end_point[1] = 0.0;
Line_coords1.end_point[2] = 0.0;
tag_t LineTag[4];
UF_CURVE_create_line(&Line_coords1, &LineTag[0]);

UF_CURVE_line_t Line_coords2;
Line_coords2.start_point[0] = 10.0;
Line_coords2.start_point[1] = 0.0;
Line_coords2.start_point[2] = 0.0;
Line_coords2.end_point[0] = 10.0;
Line_coords2.end_point[1] = 10.0;
Line_coords2.end_point[2