arp spoofing on linux

http://linux.vbird.org/linux_server/0230router.php

 

ARP Spoofing/ARP Poisoning

ARP stands for Address Resolution Protocol and it allows the network to translate IP addresses into MAC addresses. Basically, ARP works like this: When one host using IP on a LAN is trying to contact another it needs the MAC address of the host it is trying to contact. It first looks in its ARP cache (to see your ARP cache in Windows type in "arp -a" at the command line) to see if it already knows the MAC address, but if not, it broadcasts out an ARP request asking "Yo, who has this IP address I'm looking for?" If the host that has that IP address hears the ARP query it will respond with its own MAC address and a conversation can begin using IP. In common bus networks like Ethernet using a hub or 802.11b all traffic can be seen by all hosts whose NICs (network interface card) are in promiscuous mode, but things are a bit different on switched networks. A switch looks at the data sent to it and tries to only forward packets to its intended recipient based on the MAC address. Switched networks are more secure and help speed up the network by only sending packets where they need to go. There are ways around switches though. Using a program like Arpspoof (part of the Dsniff package), Ettercap or Cain we can lie to other machines on the local area network and tell them we have the IP they are looking for, thus funneling their traffic through us.

Even with a switched network it's not hard for an attacker to use Dsniff or Ettercap from the BackTrack boot CD to do some ARP spoofing and redirect traffic through them for the purposes of sniffing. These tools can even parse out usernames and passwords automatically, making the attacker's job easy. If the attacker ARP Spoofs between the gateway and the FTP server he can sniff the traffic and extract user names and passwords as users are trying to get their data from offsite, and the same thing goes for SMTP and POP3. Even with SFTP, SSL, and SSH, passwords can still be sniffed with Ettercap because it has the ability to proxy those types of connections. The user might get a warning that the public key of the server they are trying to get to has changed or may not be valid, but how many of us just click past those kinds of messages without actually reading them?

The image in figure 1 helps to illustrate how ARP Spoofing/ARP Poisoning works. Basically, the attacker is telling Alan's box that he has the IP that corresponds to Brian's box and vice versa. By doing this the attacker receives all network traffic going between Alan and Brian. Once the attacker has ARP Spoofed his way between two nodes he can sniff the connection with whatever tool he likes (TCPDump, Wireshark, Ngrep, etc.) By ARP Spoofing between a computer and the LAN's gateway an attacker can see all the traffic the computer is sending out and receiving from the Internet. In this article I'm only giving the basics of how these tools are used.

A quick demonstration of ARP Spoofing using Dsniff Tools and Ettercap

Let's start by using Dug Song's Arpspoof program that comes with his Dsniff package. I use the *nix version but if you look around you may be able to find a Win32 version. The easiest way to run Dsniff is to boot from a BackTrack boot CD. The first thing you should do is make sure packet forwarding is turned on, otherwise our machine will drop all traffic between the hosts we are trying to sniff, causing a denial of service. Some of the tools I use do this automatically (Like Ettercap), but to be sure, you may want to do it yourself. Use the following commands, depending on operating system:

Linux:
echo 1 > /proc/sys/net/ipv4/ip_forward  

BSD:
sysctl -w net.inet.ip.forwarding=1    (iphone下用的也是这种设置)

Now that your computer will forward the traffic you can start ARP Spoofing. Let's assume you want to sniff all traffic between a host and the gateway so you can see the traffic it's sending to the Internet. To get traffic in both directions you would use the following two commands:

arpspoof -t 192.168.1.1 192.168.1.2 & >/dev/null
arpspoof -t 192.168.1.2 192.168.1.1 & >/dev/null

The "& >/dev/nul" part is there to make it easier to run from one terminal, but you may want to omit it for debugging purposes. Now you can use any package you wish to sniff the connection. To start with I'd recommend using the Sniffer Dsniff that comes along with Arpspoof to sniff for plain text passwords. To start sniffing with Dsniff just drop out to a command shell and type:

dsniff

As Dsniff finds passwords and usernames it will print them to the screen. To look at all sorts of other traffic I would recommend TCPDump or Wireshark. When you are ready to stop ARP Spoofing issue the following command:

killall arpspoof

This should kill the two instances of Arpspoof started above.
Another great tool is Ettercap, the Swiss army knife of ARP Poisoning and password sniffing. I usually use it in non-interactive mode, but by default it has a ncurses interface that some may find easier to use. If you would like to use Ettercap for ARP poisoning instead, the following commands should serve as good examples. If we wanted to target all hosts on the network and sniff traffic between every node, we would use the following command:

ettercap -T -q -M ARP 

Be careful with the above command, having all of the traffic on a large network going though one slow computer can really bog down network connections. If we had a specific victim in mind, let's say a host with the IP 192.168.1.1, we would use this command:

ettercap -T -q -M ARP:REMOTE /192.168.1.1/ //

If 192.168.1.1 is the gateway, we should be able to see all outgoing traffic. Here are what the command line option flags do:

-T tells Ettercap to use the text interface, I like this option the best as the more GUI modes are rather confusing.
-q tells Ettercap to be more quiet, in other words less verbose.
-M tells Ettercap the MITM (Man in the Middle) method we want to use, in this case ARP poisoning.

ettercap的效应强于arpspoof，可以用于对子网内主机的批量欺骗，效果非常好。

移动设备上也有这种案例，请参照http://www.freebuf.com/articles/wireless/10276.html，讲如何在iphone上嗅探。