FPGA_工程_基于rom的vga显示

一 框图

FPGA_工程_基于rom的vga显示_第1张图片

二 代码修改

module Display
#(
	parameter H_DISP = 1280,
	parameter V_DISP = 1024,
    parameter H_lcd = 12'd150,
    parameter V_lcd = 12'd150,
    parameter LCD_SIZE = 15'd10_000
)
( 
	input  wire	 		clk,	
	input  wire			rst_n,	
	input  wire	[11:0]	lcd_xpos,	//lcd horizontal coordinate
	input  wire	[11:0]	lcd_ypos,	//lcd vertical coordinate
	
	output wire  [23:0]	lcd_data	//lcd data
);

wire        [23:0] pic_data;
wire          lcd_valid;
reg         [14:0] rom_addra;
reg          [23:0] data_lcd;

assign lcd_data = (lcd_valid == 1'b1) ?  pic_data : data_lcd;
assign lcd_valid = ((lcd_xpos >=(((H_DISP-H_lcd)/2))))
                    &&((lcd_xpos >=(((H_DISP-H_lcd)/2)+H_lcd)))
                    &&((lcd_ypos >=(((V_DISP-V_lcd)/2))))
                    &&((lcd_ypos >=(((V_DISP-V_lcd)/2)+V_lcd)));   

always@(posedge clk or negedge rst_n)
      if(rst_n==1'b0)
        rom_addra <= 15'd0;
      else  if(rom_addra == LCD_SIZE - 1'b1)
        rom_addra <= 15'd0;
      else  if(lcd_valid == 1'b1)
        rom_addra <= rom_addra+1'b1;

`ifdef VGA_HORIZONTAL_COLOR
always@(posedge clk or negedge rst_n)
begin
	if(!rst_n)
		lcd_data <= 24'h0;
	else
		begin
		if	(lcd_ypos >= 0 && lcd_ypos < (V_DISP/8)*1)
			data_lcd <= `RED;
		else if(lcd_ypos >= (V_DISP/8)*1 && lcd_ypos < (V_DISP/8)*2)
			data_lcd <= `GREEN;
		else if(lcd_ypos >= (V_DISP/8)*2 && lcd_ypos < (V_DISP/8)*3)
			data_lcd <= `BLUE;
		else if(lcd_ypos >= (V_DISP/8)*3 && lcd_ypos < (V_DISP/8)*4)
			data_lcd <= `WHITE;
		else if(lcd_ypos >= (V_DISP/8)*4 && lcd_ypos < (V_DISP/8)*5)
			data_lcd <= `BLACK;
		else if(lcd_ypos >= (V_DISP/8)*5 && lcd_ypos < (V_DISP/8)*6)
			data_lcd <= `YELLOW;
		else if(lcd_ypos >= (V_DISP/8)*6 && lcd_ypos < (V_DISP/8)*7)
			data_lcd <= `CYAN;
		else
			data_lcd <= `ROYAL;
		end
end
`endif

`ifdef VGA_VERTICAL_COLOR
always@(posedge clk or negedge rst_n)
begin
	if(!rst_n)
		lcd_data <= 24'h0;
	else
		begin
		if	(lcd_xpos >= 0 && lcd_xpos < (H_DISP/8)*1)
			data_lcd <= `RED;
		else if(lcd_xpos >= (H_DISP/8)*1 && lcd_xpos < (H_DISP/8)*2)
			data_lcd <= `GREEN;
		else if(lcd_xpos >= (H_DISP/8)*2 && lcd_xpos < (H_DISP/8)*3)
			data_lcd <= `BLUE;
		else if(lcd_xpos >= (H_DISP/8)*3 && lcd_xpos < (H_DISP/8)*4)
			data_lcd <= `WHITE;
		else if(lcd_xpos >= (H_DISP/8)*4 && lcd_xpos < (H_DISP/8)*5)
			data_lcd <= `BLACK;
		else if(lcd_xpos >= (H_DISP/8)*5 && lcd_xpos < (H_DISP/8)*6)
			data_lcd <= `YELLOW;
		else if(lcd_xpos >= (H_DISP/8)*6 && lcd_xpos < (H_DISP/8)*7)
			data_lcd <= `CYAN;
		else
			data_lcd <= `ROYAL;
		end
end
`endif

`ifdef VGA_GRAFTAL_GRAPH
always@(posedge clk or negedge rst_n)
begin
	if(!rst_n)
		lcd_data <= 24'h0;
	else
		lcd_data <= lcd_xpos * lcd_ypos;
end
`endif


`ifdef VGA_GRAY_GRAPH
always@(posedge clk or negedge rst_n)
begin
	if(!rst_n)
		lcd_data <= 24'h0;
	else
		begin
		if(lcd_ypos < V_DISP/2)
			lcd_data <= {lcd_ypos[7:0], lcd_ypos[7:0], lcd_ypos[7:0]};
		else
			lcd_data <= {lcd_xpos[7:0], lcd_xpos[7:0], lcd_xpos[7:0]};
		end
end
`endif

 vga_Demo_ip vga_inst (
     .addra(addra),
     .clka(clk),
     .doa(pic_data)
   );

endmodule

对工程中的数据生成模块进行了修改,例化了rom ip ,增添了逻辑语句,用于输出图像数据。

你可能感兴趣的:(fpga开发,fpga,图像处理,学习,信号处理,系统架构)