汇编代码生成和编译器的后端

1.前置程序：语义分析和中间代码生成

基于SLR(1)分析的语义分析及中间代码生成程序-CSDN博客https://blog.csdn.net/lijj0304/article/details/135097554?spm=1001.2014.3001.5501

2.程序目标

在前面编译器前端实现的基础上，将所生成的中间代码翻译成某种目标机的汇编代码，实现编译器后端实现的任务。然后进一步实现程序的输入是源程序，输出是汇编语言目标代码小型实验语言编译器。最终程序是实现了算式的识别和汇编代码生成的功能

3.主要数据结构

生成汇编代码用到的寄存器我直接用字符串来实现，因为寄存器仅需要存储变量名即可

char rs0[MAX_LEN];  
char rs1[MAX_LEN]; // 设置两个寄存器  
rs0[0] = '\0';  
rs1[0] = '\0';  

对于四元式构造了一个专门的数据结构来存储他的四个变量，同时构建一个四元式的数组来管理，四元式数组的大小刚好也对应了中间变量的数量。

struct quadruple {
    char op[MAX_LEN];
    char arg1[MAX_LEN];
    char arg2[MAX_LEN];
    char result[MAX_LEN];
}; // 四元式数据结构

3.程序描述

先初始化了两个寄存器R0和R1，如何通过遍历四元式的数据结构数组来生成汇编代码。主要思路是先考虑寄存器中的值，即这个四元式中是否有变量存储在了R0或者R1中。

int flag = 0; // flag为0表示两个寄存器都空闲，1表示找到第一个操作数，2表示找到第二个操作数, 3表示两个操作数都找到  
int tag = -1; // tag为0表示值在rs0，1表示值在rs1  
if((strcmp(rs0, quad[i].arg1) == 0 && strcmp(rs1, quad[i].arg2) == 0) || (strcmp(rs0, quad[i].arg2) == 0 && strcmp(rs1, quad[i].arg1) == 0)) {  
    flag = 3;  
}  
else if(strcmp(rs0, quad[i].arg1) == 0) {  
    flag = 1, tag = 0;  
}  
else if(strcmp(rs1, quad[i].arg1) == 0) {  
    flag = 1, tag = 1;  
}  
else if(strcmp(rs0, quad[i].arg2) == 0) {  
    flag = 2, tag = 0;  
}  
else if(strcmp(rs1, quad[i].arg2) == 0) {  
    flag = 2, tag = 1;  
}  

在生成了对应四元式的汇编代码后，还需考虑这个结果值是是否在之后要被使用若不需要使用则可以直接把寄存器置空。

int use0(int p) { // 判断是否还会用到寄存器rs0内容
    for(int i = p; i <= quadTop; i++) {
        if(strcmp(quad[i].arg1, rs0) == 0 || strcmp(quad[i].arg2, rs0) == 0) {
            return 1;
        }
    }
    return 0;
}
int use1(int p) { // 判断是否还会用到寄存器rs1内容
    for(int i = p; i <= quadTop; i++) {
        if(strcmp(quad[i].arg1, rs1) == 0 || strcmp(quad[i].arg2, rs1) == 0) {
            return 1;
        }
    }
    return 0;
}

若寄存器R0和R1都不含有变量，则需要找空的及存储变量，若没有可用寄存器则需要报错

        if(flag == 0) {
            if(rs0[0] == '\0') {
                printf("MOV R0, %s\n", quad[i].arg1);
                printf("%s R0, %s\n", opstr, quad[i].arg2);
                strcpy(rs0, quad[i].result);
                if(use0(i + 1) == 0) {
                    rs0[0] = '\0';
                }
            }
            else if(rs1[0] == '\0') {
                printf("MOV R1, %s\n", quad[i].arg1);
                printf("%s R1, %s\n", opstr, quad[i].arg2);
                strcpy(rs1, quad[i].result);
                if(use1(i + 1) == 0) {
                    rs1[0] = '\0';
                }
            }
            else {
                printf("Assembly failed\n");
                return;
            }
        }

如果R0和R1中有变量，则直接操作对应寄存器，生成代码即可

        else if(flag == 2) {
            if(tag == 0) {
                printf("%s R0, %s\n", opstr, quad[i].arg1);
                strcpy(rs0, quad[i].result);
                if(use0(i + 1) == 0) {
                    rs0[0] = '\0';
                }
            }
            else {
                printf("%s R1, %s\n", opstr, quad[i].arg1);
                strcpy(rs1, quad[i].result);
                if(use1(i + 1) == 0) {
                    rs1[0] = '\0';
                }
            }
        }
        else if(flag == 3) {
            if(use0(i + 1) == 0) {
                printf("%s R0, R1\n", opstr);
                strcpy(rs0, quad[i].result);
            }
            else {
                printf("%s R1, R0\n", opstr);
                strcpy(rs1, quad[i].result);
            }
        }
    }

4.完整代码

#include
#include
#include
#define MAX_LEN 1000

struct stack {
    char s[MAX_LEN];
    int i[MAX_LEN];
    int point[MAX_LEN];
    int top;
}; // 分析栈数据结构

struct quadruple {
    char op[MAX_LEN];
    char arg1[MAX_LEN];
    char arg2[MAX_LEN];
    char result[MAX_LEN];
}; // 四元式数据结构

struct quadruple quad[MAX_LEN]; // 存储四元式
int quadTop = 0; // 四元式栈顶

char rs0[MAX_LEN];
char rs1[MAX_LEN]; // 设置两个寄存器

// 1.S→V=E  2.E→E+T  3.E→E-T  4.E→T  5.T→T*F  6.T→T/F  7.T→F  8.F→(E) 9.F→i  10.V→i
// 表中大于0对应移进，小于0则对应先归约后移进，0为不存在的状态
                    //          GOTO           |    ACTION
                    //i, =, +, -, *, /, (, ), #, S, E, T, F, V
int table[20][14] ={{ 3, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0, 0, 2},// 0
                    { 0, 0, 0, 0, 0, 0, 0, 0,-11,0,0, 0, 0, 0},// 1
                    { 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},// 2
                    {-10,-10,-10,-10,-10,-10,-10,-10,-10, 0, 0, 0, 0, 0},//3
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0, 5, 6, 7, 0},// 4
                    {-1,-1,10,11,-1,-1,-1,-1,-1, 0, 0, 0, 0, 0},// 5
                    {-4,-4,-4,-4,12,13,-4,-4,-4, 0, 0, 0, 0, 0},// 6
                    {-7,-7,-7,-7,-7,-7,-7,-7,-7, 0, 0, 0, 0, 0},// 7
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0,14, 6, 7, 0},// 8
                    {-9,-9,-9,-9,-9,-9,-9,-9,-9, 0, 0, 0, 0, 0},// 9
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0,15, 7, 0},//10
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0,16, 7, 0},//11
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0,17, 0},//12
                    { 9, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0,18, 0},//13
                    { 0, 0,10,11, 0, 0, 0,19, 0, 0, 0, 0, 0, 0},//14
                    {-2,-2,-2,-2,12,13,-2,-2,-2, 0, 0, 0, 0, 0},//15
                    {-3,-3,-3,-3,12,13,-3,-3,-3, 0, 0, 0, 0, 0},//16
                    {-5,-5,-5,-5,-5,-5,-5,-5,-5, 0, 0, 0, 0, 0},//17
                    {-6,-6,-6,-6,-6,-6,-6,-6,-6, 0, 0, 0, 0, 0},//18
                    {-8,-8,-8,-8,-8,-8,-8,-8,-8, 0, 0, 0, 0, 0}};//19

int english(char ch) {
	if((ch >= 'a' && ch <= 'z') || (ch >= 'A' && ch <= 'Z')) return 1;
	else return 0;
}
int number(char ch) {
	if(ch >= '0' && ch <= '9') return 1;
	else return 0;
}
int reserved(char str[]) {
	if(strcmp(str, "void") == 0) return 3;
    else if(strcmp(str, "int") == 0) return 4;
    else if(strcmp(str, "float") == 0) return 5;
    else if(strcmp(str, "double") == 0) return 6;
    else if(strcmp(str, "if") == 0) return 7;
    else if(strcmp(str, "else") == 0) return 8;
    else if(strcmp(str, "for") == 0) return 9;
    else if(strcmp(str, "do") == 0) return 10;
    else if(strcmp(str, "while") == 0) return 11;
	else if(strcmp(str, "break") == 0) return 12;
    else if(strcmp(str, "return") == 0) return 13;
    else return 1;
}
int symbol(char ch) {
	if(ch == ';') return 14;
	else if(ch == ',') return 15;
	else if(ch == '(') return 16;
	else if(ch == ')') return 17;
	else if(ch == '{') return 18;
	else if(ch == '}') return 19;
	else if(ch == '[') return 20;
	else if(ch == ']') return 21;
	else if(ch == '%') return 22;
	else if(ch == '?') return 23;
	else if(ch == ':') return 24;
	else if(ch == '\'') return 25;
	else if(ch == '\"') return 26;
	else if(ch == '.') return 27;
	else return 0;
}

int getindex(char ch) {
    switch(ch) {
        case 'i': return 0;
        case '=': return 1;
        case '+': return 2;
        case '-': return 3;
        case '*': return 4;
        case '/': return 5;
        case '(': return 6;
        case ')': return 7;
        case '#': return 8;
        case 'S': return 9;
        case 'E': return 10;
        case 'T': return 11;
        case 'F': return 12;
        case 'V': return 13;
        default: return -1;
    }
}

int use0(int p) { // 判断是否还会用到寄存器rs0内容
    for(int i = p; i <= quadTop; i++) {
        if(strcmp(quad[i].arg1, rs0) == 0 || strcmp(quad[i].arg2, rs0) == 0) {
            return 1;
        }
    }
    return 0;
}
int use1(int p) { // 判断是否还会用到寄存器rs1内容
    for(int i = p; i <= quadTop; i++) {
        if(strcmp(quad[i].arg1, rs1) == 0 || strcmp(quad[i].arg2, rs1) == 0) {
            return 1;
        }
    }
    return 0;
}

void assembly() {
    printf("Assembly Code:\n"); 
    for(int i = 1; i <= quadTop; i++) {
        char opstr[MAX_LEN];
        if(quad[i].op[0] == '=') { // 赋值语句的处理
            if(strcmp(quad[i].arg1, rs0) == 0){
                printf("MOV %s, R0\n", quad[i].result);
            }
            if(strcmp(quad[i].arg1, rs1) == 0) {
                printf("MOV %s, R1\n", quad[i].result);
            }
            continue;
        }
        else if(quad[i].op[0] == '+') { // 获取对应操作码字符串
            strcpy(opstr, "ADD");
        }
        else if(quad[i].op[0] == '-') {
            strcpy(opstr, "SUB");
        }
        else if(quad[i].op[0] == '*') {
            strcpy(opstr, "MUL");
        }
        else if(quad[i].op[0] == '/') {
            strcpy(opstr, "DIV");
        }
        int flag = 0; // flag为0表示两个寄存器都空闲，1表示找到第一个操作数，2表示找到第二个操作数, 3表示两个操作数都找到
        int tag = -1; // tag为0表示值在rs0，1表示值在rs1
        if((strcmp(rs0, quad[i].arg1) == 0 && strcmp(rs1, quad[i].arg2) == 0) || (strcmp(rs0, quad[i].arg2) == 0 && strcmp(rs1, quad[i].arg1) == 0)) {
            flag = 3;
        }
        else if(strcmp(rs0, quad[i].arg1) == 0) {
            flag = 1, tag = 0;
        }
        else if(strcmp(rs1, quad[i].arg1) == 0) {
            flag = 1, tag = 1;
        }
        else if(strcmp(rs0, quad[i].arg2) == 0) {
            flag = 2, tag = 0;
        }
        else if(strcmp(rs1, quad[i].arg2) == 0) {
            flag = 2, tag = 1;
        }
        if(flag == 0) {
            if(rs0[0] == '\0') {
                printf("MOV R0, %s\n", quad[i].arg1);
                printf("%s R0, %s\n", opstr, quad[i].arg2);
                strcpy(rs0, quad[i].result);
                if(use0(i + 1) == 0) {
                    rs0[0] = '\0';
                }
            }
            else if(rs1[0] == '\0') {
                printf("MOV R1, %s\n", quad[i].arg1);
                printf("%s R1, %s\n", opstr, quad[i].arg2);
                strcpy(rs1, quad[i].result);
                if(use1(i + 1) == 0) {
                    rs1[0] = '\0';
                }
            }
            else {
                printf("Assembly failed\n");
                return;
            }
        }
        else if(flag == 1) {
            if(tag == 0) {
                printf("%s R0, %s\n", opstr, quad[i].arg2);
                strcpy(rs0, quad[i].result);
                if(use0(i + 1) == 0) {
                    rs0[0] = '\0';
                }
            }
            else {
                printf("%s R1, %s\n", opstr, quad[i].arg2);
                strcpy(rs1, quad[i].result);
                if(use1(i + 1) == 0) {
                    rs1[0] = '\0';
                }
            }
        }
        else if(flag == 2) {
            if(tag == 0) {
                printf("%s R0, %s\n", opstr, quad[i].arg1);
                strcpy(rs0, quad[i].result);
                if(use0(i + 1) == 0) {
                    rs0[0] = '\0';
                }
            }
            else {
                printf("%s R1, %s\n", opstr, quad[i].arg1);
                strcpy(rs1, quad[i].result);
                if(use1(i + 1) == 0) {
                    rs1[0] = '\0';
                }
            }
        }
        else if(flag == 3) {
            if(use0(i + 1) == 0) {
                printf("%s R0, R1\n", opstr);
                strcpy(rs0, quad[i].result);
            }
            else {
                printf("%s R1, R0\n", opstr);
                strcpy(rs1, quad[i].result);
            }
        }
    }
}

int SLR(char *str, struct stack *stk) { // SLR1分析函数
    quadTop = 0;
    int i = 0;
    int next;
    while(i < strlen(str)) {
        if(stk->top < 0) return 0; // 分析栈不可能为空
        int y; // 列坐标
        if (str[i] >= 'a' && str[i] <= 'z') y = getindex('i'); // 终结符i
        else y = getindex(str[i]);
        if(y == -1 || table[stk->i[stk->top]][y] == 0) { // 表中不存在的状态，分析报错
            return 0;
        }
        if(table[stk->i[stk->top]][y] > 0) { // 移进操作
            next = table[stk->i[stk->top]][y];
            stk->top++;
            stk->s[stk->top] = str[i];
            stk->i[stk->top] = next;
            stk->point[stk->top] = i;
            i++;
        }
        else if(table[stk->i[stk->top]][y] < 0) { // 归约操作
            int tmp = -table[stk->i[stk->top]][y]; // 查GOTO表
            if(tmp == 4 || tmp == 7 || tmp == 9 || tmp == 10) {
                stk->top--; // 要归约1位
            }
            else if(tmp == 2 || tmp == 3 || tmp == 5 || tmp == 6){
                // 生成四元式
                quadTop++;
                if(tmp == 2) strcpy(quad[quadTop].op, "+");
                else if(tmp == 3) strcpy(quad[quadTop].op, "-");
                else if(tmp == 5) strcpy(quad[quadTop].op, "*");
                else strcpy(quad[quadTop].op, "/");
                if(stk->point[stk->top - 2] < 0) sprintf(quad[quadTop].arg1, "t%d", -stk->point[stk->top - 2]);
                else {
                    char arg1[2] = {str[stk->point[stk->top - 2]], '\0'};
                    strcpy(quad[quadTop].arg1, arg1);
                }
                if(stk->point[stk->top] < 0) sprintf(quad[quadTop].arg2, "t%d", -stk->point[stk->top]);
                else {
                    char arg2[2] = {str[stk->point[stk->top]], '\0'};
                    strcpy(quad[quadTop].arg2, arg2);
                }
                sprintf(quad[quadTop].result, "t%d", quadTop);
                stk->top -= 3; // 归约3位
                stk->point[stk->top + 1] = -quadTop; // 记录归约产生的中间变量
            }
            else if(tmp == 8) {
                stk->top -= 3; // 归约3位
                stk->point[stk->top + 1] = stk->point[stk->top + 2]; // 消除括号规约
            }
            else if(tmp == 1){
                quadTop++;
                strcpy(quad[quadTop].op, "=");
                if(stk->point[stk->top] < 0) sprintf(quad[quadTop].arg1, "t%d", abs(stk->point[stk->top]));
                else {
                    char arg1[2] = {str[stk->point[stk->top]], '\0'};
                    strcpy(quad[quadTop].arg1, arg1);
                }
                sprintf(quad[quadTop].arg2, " ");
                char res[2] = {str[stk->point[stk->top - 2]], '\0'};
                strcpy(quad[quadTop].result, res);
                stk->top -= 3; // 归约V=E
            }
            else stk->top -= 3;
            if(tmp == 1) { 
                y = getindex('S');
                next = table[stk->i[stk->top]][y]; // 查ACTION表
                stk->top++;
                stk->s[stk->top] = 'S';
                stk->i[stk->top] = next; // 归约要修改栈顶
            }
            else if(tmp == 2 || tmp ==3 || tmp == 4) {
                y = getindex('E');
                next = table[stk->i[stk->top]][y]; 
                stk->top++;
                stk->s[stk->top] = 'E';
                stk->i[stk->top] = next;
            }
            else if(tmp == 5 || tmp == 6 || tmp == 7) {
                y = getindex('T');
                next = table[stk->i[stk->top]][y];
                stk->top++;
                stk->s[stk->top] = 'T';
                stk->i[stk->top] = next;
            }
            else if(tmp == 8 || tmp == 9) {
                y = getindex('F');
                next = table[stk->i[stk->top]][y];
                stk->top++;
                stk->s[stk->top] = 'F';
                stk->i[stk->top] = next;
            }
            else if(tmp == 10) {
                y = getindex('V');
                next = table[stk->i[stk->top]][y];
                stk->top++;
                stk->s[stk->top] = 'V';
                stk->i[stk->top] = next;
            }
            else if(tmp == 11) {
                return 1; 
            }
        }
    }
    return 0;
}

int main() {
    for(int i = 1; i <= 2; i++){
		char txt1[] = "./test/test";
		char num[8];
		sprintf(num, "%d.txt", i);
		strcat(txt1, num);
		FILE *fp = fopen(txt1, "r");
		int flag = 0;
		char ch = fgetc(fp);	
		while(!feof(fp)) {
			int j = 0;
			if(ch == ' ' || ch == '\t') {
				ch = fgetc(fp);
				continue;
			}
			else if(ch == '\n'){
				ch = fgetc(fp);
				continue;
			}
			else if(english(ch)) {
				do{
					ch = fgetc(fp);
				}while(english(ch)||number(ch));
			}
			else if(number(ch)) {
				do{
					ch = fgetc(fp);
				}while(number(ch));
			}
			else if(symbol(ch) != 0) {
				ch = fgetc(fp);
			}
			else if(ch == '>') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
				else if(ch == '>') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '<') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
				else if(ch == '<') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '!') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '=') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '/') {
				ch = fgetc(fp);
				if(ch == '*') {
					do {
						ch = fgetc(fp);
						if(ch == '*') {
							ch = fgetc(fp);
							if(ch == '/') {
								ch = fgetc(fp);
								break;
							}
						}
					}while(1);
				}
				else if(ch == '/') {
					do {
						ch = fgetc(fp);
					}while(ch != '\n');
					ch = fgetc(fp);
				}
				else if(ch == '=') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '&') {
				ch = fgetc(fp);
				if(ch == '&') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '|') {
				ch = fgetc(fp);
				if(ch == '|') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '+') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
				else if(ch == '+') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '-') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
				else if(ch == '-') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '*') {
				ch = fgetc(fp);
				if(ch == '=') {
					ch = fgetc(fp);
				}
			}
			else if(ch == '\\') {
				ch = fgetc(fp);
				if(ch == 'n') {
					ch = fgetc(fp);
				}
			}
			else {
				printf("\ntest%d: Undefined Symbol!\n", i); 
				flag = 1;
				break;
			}
		}
        if(flag == 0) printf("\ntest%d: Lexical Legal\n", i);
        else continue;
        fclose(fp);
        FILE *fa = fopen(txt1, "r");
		char input[MAX_LEN] = "";
		fgets(input, MAX_LEN, fa);
        printf("Input scentence: %s\n", input); // input为输入串
        int len = strlen(input);
        input[len] = '#';
		fclose(fa);
        struct stack *stk;
        stk = (struct stack *)malloc(sizeof(struct stack));
		stk->s[0] = '#';
        stk->i[0] = 0;
        stk->point[0] = -1;
        stk->top = 0; //初始化分析栈
        if(!SLR(input, stk)) {
            printf("Gramma illegal\n");
        }
        else {
            //printQuad(); // 打印四元式
            rs0[0] = '\0';
            rs1[0] = '\0';
            assembly(); // 生成汇编代码
        }
	}
    return 0;
}

5.测试运行

tets1：a=(b+c*d)/f+e*g

test2：a=b+(c+d)*/e

程序运行截图