Juniper交换机配置命令_学习笔记

conf 进入配置模式

show configuration |display set 查看全部配置
show lldp neighbors 查看LLDP邻居
show chassis alarms 查看机箱告警
show sytem alarms 查看系统告警
show vlans 查看vlan
show int terse 查看接口状态
show eth table 查看端口及mac地址
show eth table | mach mac后可加IP地址或mac地址

set interface ge-0/0/1 disable 关闭端口
delete interface ge-0/0/1 disable 恢复端口

commint syn 保存配置
commin check 检查配置

set system host-name XXX 设置设备主机名称
set system time-zone Asia/shanghai 设置时间

set system root-authentication encrypted-password 设置ROOT用户名
set system login user henan uid 2000 设置系统登陆用户
set system login user henan class super-user 设置用户权限 read-only
set system login user authentication encrypted-password 设置用户密码

set system services ssh 设置ssh
set system services telnet 设置telnet

set system services web-management http interface all 设置web管理书
set system services web-management https interface all 设置https管理

set system service ntp server 192.168.249.22 设置NTP服务器地址

set chassis alarem menagement-ethernet link-down ignore 设置机箱报警管理以太网链路断开忽略

准入
set interfaces interface-range dot1 member-range ge-0/0/0 to ge-0/0/5
delete interfaces interface-fange dot1 member-range ge-0/0/6 to ge-0/0/23

set interfaces ge-1/0/1 unit 0 description XXX 设置接口描述
set interfaces ge-1/0/1 unit 0 family inet address 192.168.148.1/24 设置接口地址

set vlans vlan10 vlan-id 10 设置vlanid
set vlans vlan10 l3-interface vlan.10 开启三层vlan
set interfaces vlan unit 10 family inet address 192.168.146.126/25 设置vlan地址

set interfaces interface-range All member ge-0/ 0/1 to ge-0/0/23 设置接口接口范围所有成员1-23口
set interfaces interface-range All unit 0 family ehernet-switching port-mode access 设置所有接口端口状态为access
set interface interface-range All unit 0 family ehternet-switching vlan members vlan10 设置所有接口属于VLAN10

set interfaces interface-range one member-range ge-6/0/1 to ge-6/0/2
set interfaces interface-range one unit 0 family ethernet-switching port-mode access
set interfaces interface-range one unit 0 family ethernet-switching vlan members 10

set interfaces ge-1/0/1 description To-xiaomi 设置接口描述
set interfaces ge-1/0/1 unit 0 family ethernet-switching port-mode access 设置接口状态为access
set interfaces ge-1/0/1 unit 0 family ethernet-switching vlan members vlan10 设置接口属于vlan10

set routing-options static route 0.0.0.0/0 next-hop 192.168.146.1 设置路由选项静态路由下一条

set ethernet-switching-options secure-access-port interface ge-0/1/1.0 static-ip 192.168.146.124 vlan 10 设置以太网交换机选项安全端口静态ip
set ethernet-switching-options secure-access-port interface ge-0/1/1.0 static-ip 192.168.146.124 mac 3c:8a:b0:ee:91:c1 设置以太网交换机选项安全端口静态ip mac地址

set ethernet-switching-options secure-access-port vlan vlan10 arp-inspection 设置以太网交换机选项安全端口vlan10 arp检查
set ethernet-switching-options secure-access-port vlan vlan10 ip-source-guard 设置以太网交换机选项安全端口vlan10 源IP保护
set ethernet-switching-options storm-control interface all 设置以太网交换选项风暴控制接口全部
set ethernet-switching-options bpdu-block disable-timeout 30 设置以太网交换选项bpdu块禁用超时30

端口镜像：
set ethernet-switching-options analyzer debug input ingress intreface ge-0/0/0.0 设置以太网交换选项分析调试输入进口接口ge-0/0/0.0
set ethernet-switching-options analyzer debug input egress intreface ge-0/0/0.0 设置以太网交换选项分析调试输入出口接口ge-0/0/0.0
set ethernet-switching-options analyzer debug output interface ge-0/0/4.0 设置以太网交换选项分析调试输出接口ge-0/0/4.0

清楚LED灯报警
clear alarm traffic 交通
clear alarm event 事件

EX2200 ALARM告警灯亮红灯
set chassis alarm management-ethernet link-down ignore 管理口状态警告信息灯关闭
set chassis alarm ethernet link-down ignore 交换机端口状态警告信息灯关闭