Freeswitch中mod_commonds
mod_commands
Table of Contents (click to expand)
- 0. About
- 1. Usage
- 1.1 CLI
- 1.2 API/Event Interfaces
- 1.3 Scripting Interfaces
- 1.4 From the Dialplan
- 2. Format of returned data
- 3. Core Commands
- 3.1 acl
- 3.1.1 Syntax
- 3.1.2 Examples
- 3.2 alias
- 3.2.1 Syntax
- 3.2.2 Examples
- 3.3 bgapi
- 3.3.1 Syntax
- 3.3.2 Examples
- 3.1 acl
- cond
- domain_exists
- eval
- expand
- fsctl
- api_expansion
- calibrate_clock
- debug_level
- debug_sql
- default_dtmf_duration
- flush_db_handles
- hupall
- last_sps
- loglevel
- max_sessions
- max_dtmf_duration
- min_dtmf_duration
- min_idle_cpu
- pause
- pause_check
- ready_check
- reclaim_mem
- recover
- resume
- save_history
- send_sighup
- shutdown
- shutdown_check
- sps
- sync_clock
- sync_clock_when_idle
- verbose_events
- global_getvar
- global_setvar
- group
- group_call
- help
- host_lookup
- hupall
- in_group
- is_lan_addr
- json
- load
- md5
- module_exists
- msleep
- nat_map
- regex
- reload
- reloadacl
- reloadxml
- show
- Tips For Showing Calls and Channels
- shutdown
- status
- strftime_tz
- unload
- version
- xml_locate
- xml_wrap
· Call Management Commands
- break
- create_uuid
- originate
- Arguments
- Variables
- Examples
- pause
- uuid_answer
- uuid_audio
- uuid_break
- uuid_bridge
- uuid_broadcast
- uuid_buglist
- uuid_chat
- uuid_debug_media
- Read Format
- Write Format
- uuid_deflect
- uuid_displace
- uuid_display
- uuid_dual_transfer
- uuid_dump
- uuid_early_ok
- uuid_exists
- uuid_flush_dtmf
- uuid_fileman
- uuid_getvar
- uuid_hold
- uuid_kill
- uuid_limit
- uuid_media
- uuid_media_reneg
- uuid_park
- uuid_pre_answer
- uuid_preprocess
- uuid_recv_dtmf
- uuid_send_dtmf
- uuid_send_info
- uuid_session_heartbeat
- uuid_setvar
- uuid_setvar_multi
- uuid_simplify
- uuid_transfer
- uuid_phone_event
· Record/Playback Commands
- uuid_record
· Limit Commands
- limit_reset
- limit_status
- limit_usage
- uuid_limit_release
- limit_interval_reset
· Miscellaneous Commands
- bg_system
- echo
- file_exists
- find_user_xml
- list_users
- sched_api
- sched_broadcast
- sched_del
- sched_hangup
- sched_transfer
- stun
- system
- time_test
- timer_test
- tone_detect
- unsched_api
- url_decode
- url_encode
- user_data
- user_exists
· See Also
0. About
mod_commands processes the FreeSWITCH API commands.
FreeSWITCH API
The public FreeSWITCH API consists of all the commands that can be issued to FreeSWITCH via
- its console, fs_cli,
- the event socket interface, and
- scripting interfaces.
The set of available commands is dependent on which modules are loaded. The authoritative set of commands for your installation is the union of the sets of commands registered by each module.
To see a list of available API commands simply type help or show api at the CLI.
1. Usage
1.1 CLI
See below.
1.2 API/Event Interfaces
- mod_event_socket
- mod_erlang_event
- mod_xml_rpc
1.3 Scripting Interfaces
- mod_perl
- mod_v8
- mod_python
- mod_lua
1.4 From the Dialplan
An API command can be called from the dialplan. Example:
Invoke API Command From Dialplan
Other examples:
Other Dialplan API Command Examples
API commands with multiple arguments usually have the arguments separated by a space:
Multiple Arguments
Dialplan Usage
If you are calling an API command from the dialplan make absolutely certain that there isn't already a dialplan application that gives you the functionality you are looking for. See mod_dptools for a list of dialplan applications, they are quite extensive.
2. Format of returned data
Results of some status and listing commands are presented in comma delimited lists by default.
Data returned from some modules may also contain commas, making it difficult to automate result processing. They may be able to be retrieved as
- XML by appending the string as xml
- JSON by appending the string as json
- the default format but changing the default comma delimiter by appending as delim
to the end of the command string.
3. Core Commands
Extraction script
Mitch Capper wrote a Perl script to extract commands from mod_commands's source code, mod_commands.c , but should work for most other files as well.
Extraction Perl Script Expand source
#!/usr/bin/perl
use strict;
open (fl,"src/mod/applications/mod_commands/mod_commands.c");
my $cont;
{
local $/ = undef;
$cont =
}
close fl;
my %DEFINES;
my $reg_define = qr/[A-Za-z0-9_]+/;
my $reg_function = qr/[A-Za-z0-9_]+/;
my $reg_string_or_define = qr/(?:(?:$reg_define)|(?:"[^"]*"))/;
#load defines
while ($cont =~ /
^\s* \#define \s+ ($reg_define) \s+ \"([^"]*)\"
/mgx){
warn "$1 is #defined multiple times" if ($DEFINES{$1});
$DEFINES{$1} = $2;
}
sub resolve_str_or_define($){
my ($str) = @_;
if ($str =~ s/^"// && $str =~ s/"$//){ #if starts and ends with a quote strip them off and return the str
return $str;
}
warn "Unable to resolve define: $str" if (! $DEFINES{$str});
return $DEFINES{$str};
}
#parse commands
while ($cont =~ /
SWITCH_ADD_API \s* \( ([^,]+) #interface $1
,\s* ($reg_string_or_define) # command $2
,\s* ($reg_string_or_define) # command description $3
,\s* ($reg_function) # function $4
,\s* ($reg_string_or_define) # usage $5
\s*\);
/sgx){
my ($interface,$command,$descr,$function,$usage) = ($1,$2,$3,$4,$5);
$command = resolve_str_or_define($command);
$descr = resolve_str_or_define($descr);
$usage = resolve_str_or_define($usage);
warn "Found a not command interface of: $interface for command: $command" if ($interface ne "commands_api_interface");
print "$command -- $descr -- $usage\n";
}
3.1 acl
Match an IP address against an access control list (ACL).
3.1.1 Syntax
Syntax
acl
3.1.2 Examples
Examples
acl 1.2.3.4 test
3.2 alias
Provide an alternative name (i.e., an alias) to commonly used commands on the CLI to save on some keystrokes.
| Subcommand |
Description |
| add |
Create an alias. |
| stickyadd |
Create an alias that persists across restarts. |
| del |
Delete alias. |
3.2.1 Syntax
Syntax
alias add
alias stickyadd
alias del [
3.2.2 Examples
Examples
freeswitch> alias add reloadall reloadacl reloadxml
+OK
freeswitch> alias add unreg sofia profile internal flush_inbound_reg
+OK
freeswitch> alias stickyadd reloadall reloadacl reloadxml
+OK
freeswitch> alias del reloadall
+OK
3.3 bgapi
Execute an API command in a thread.
3.3.1 Syntax
Syntax
bgapi
3.3.2 Examples
| Command |
Description |
Syntax |
Examples |
||||||||
| acl |
Match an IP address against an access control list (ACL). |
acl |
acl 1.2.3.4 test |
||||||||
| alias |
Provide an alternative name (i.e., an alias) to commonly used commands on the CLI to save on some keystrokes.
|
alias add alias stickyadd alias del [ |
freeswitch> alias add reloadall reloadacl reloadxml freeswitch> alias add unreg sofia profile internal flush_inbound_reg freeswitch> alias stickyadd reloadall reloadacl reloadxml freeswitch> alias del reloadall |
||||||||
| bgapi |
Execute an API command in a thread. |
bgapi |
|||||||||
| complete |
Complete. TODO That description is not very helpful. |
complete add |
|||||||||
complete
Complete.
Usage: complete add
cond
Evaluate a conditional expression.
Usage: cond
Operators supported by
- == (equal to)
- != (not equal to)
- > (greater than)
- >= (greater than or equal to)
- < (less than)
- <= (less than or equal to)
How are values compared?
- two strings are compared as strings
- two numbers are compared as numbers
- a string and a number are compared as strlen(string) and numbers
For example, foo == 3 evaluates to true, and foo == three to false.
Examples (click to expand)
Example:
Return true if first value is greater than the second
cond 5 > 3 ? true : false
true
Example in dialplan:
Slightly more complex example:
Note about syntax
The whitespace around the question mark and colon are required since FS-5945. Before that, they were optional. If the spaces are missing, the cond function will return -ERR.
domain_exists
Check if a FreeSWITCH domain exists.
Usage: domain_exists
eval
Eval (noop). Evaluates a string, expands variables. Those variables that are set only during a call session require the uuid of the desired session or else return "-ERR no reply".
Usage: eval [uuid:
Examples:
eval ${domain}
10.15.0.94
eval Hello, World!
Hello, World!
eval uuid:e72aff5c-6838-49a8-98fb-84c90ad840d9 ${channel-state}
CS_EXECUTE
expand
Execute an API command with variable expansion.
Usage: expand [uuid:
Example:
expand originate sofia/internal/1001%${domain} 9999
In this example the value of ${domain} is expanded. If the domain were, for example, "192.168.1.1" then this command would be executed:
originate sofia/internal/1001%192.168.1.1 9999
fsctl
Send control messages to FreeSWITCH.
USAGE: fsctl
[
api_expansion [on|off] |
calibrate_clock |
debug_level [level] |
debug_sql |
default_dtmf_duration [n] |
flush_db_handles |
hupall |
last_sps |
loglevel [level] |
max_dtmf_duration [n] |
max_sessions [n] |
min_dtmf_duration [n] |
min_idle_cpu [d] |
pause [inbound|outbound] |
pause_check [inbound|outbound] |
ready_check |
reclaim_mem |
recover |
resume [inbound|outbound] |
save_history |
send_sighup |
shutdown [cancel|elegant|asap|now|restart] |
shutdown_check |
sps |
sps_peak_reset |
sql [start] |
sync_clock |
sync_clock_when_idle |
threaded_system_exec |
verbose_events [on|off]
]
fsctl arguments
api_expansion
Usage: fsctl api_expansion [on|off]
Toggles API expansion. With it off, no API functions can be expanded inside channel variables like ${show channels} This is a specific security mode that is not often used.
calibrate_clock
Usage: fsctl calibrate_clock
Runs an algorithm to compute how long it actually must sleep in order to sleep for a true 1ms. It's only useful in older kernels that don't have timerfd. In those older kernels FS auto detects that it needs to do perform that computation. This command just repeats the calibration.
debug_level
Usage: fsctl debug_level [level]
Set the amount of debug information that will be posted to the log. 1 is less verbose while 9 is more verbose. Additional debug messages will be posted at the ALERT loglevel.
0 - fatal errors, panic
1 - critical errors, minimal progress at subsystem level
2 - non-critical errors
3 - warnings, progress messages
5 - signaling protocol actions (incoming packets, ...)
7 - media protocol actions (incoming packets, ...)
9 - entering/exiting functions, very verbatim progress
debug_sql
Usage: fsctl debug_sql
Toggle core SQL debugging messages on or off each time this command is invoked. Use with caution on busy systems. In order to see all messages issue the "logelevel debug" command on the fs_cli interface.
default_dtmf_duration
Usage: fsctl default_dtmf_duration [int]
int = number of clock ticks
Example:
fsctl default_dtmf_duration 2000
This example sets the default_dtmf_duration switch parameter to 250ms. The number is specified in clock ticks (CT) where duration (milliseconds) = CT / 8 or CT = duration * 8
The default_dtmf_duration specifies the DTMF duration to use on originated DTMF events or on events that are received without a duration specified. This value is bounded on the lower end by min_dtmf_duration and on the upper end by max_dtmf_duration. So max_dtmf_duration >= default_dtmf_duration >= min_dtmf_duration . This value can be set persistently in switch.conf.xml
To check the current value:
fsctl default_dtmf_duration 0
FS recognizes a duration of 0 as a status check. Instead of setting the value to 0, it simply returns the current value.
flush_db_handles
Usage: fsctl flush_db_handles
Flushes cached database handles from the core db handlers. FreeSWITCH reuses db handles whenever possible, but a heavily loaded FS system can accumulate a large number of db handles during peak periods while FS continues to allocate new db handles to service new requests in a FIFO manner. "fsctl flush_db_handles" closes db connections that are no longer needed to avoid exceeding connections to the database server.
hupall
Usage: fsctl hupall
Disconnect existing calls to a destination and post a clearing cause.
For example, to kill an active call with normal clearing and the destination being extension 1000:
fsctl hupall normal_clearing dialed_ext 1000
last_sps
Usage: fsctl last_sps
Query the actual sessions-per-second.
fsctl last_sps
+OK last sessions per second: 723987253
(Your mileage might vary.)
loglevel
Usage: fsctl loglevel [level]
Filter much detail the log messages will contain when displayed on the fs_cli interface. See mod_console for legal values of "level" and further discussion.
The available loglevels can be specified by number or name:
0 - CONSOLE
1 - ALERT
2 - CRIT
3 - ERR
4 - WARNING
5 - NOTICE
6 - INFO
7 - DEBUG
max_sessions
Usage: fsctl max_sessions [int]
Set how many simultaneous call sessions FS will allow. This value can be ascertained by load testing, but is affected by processor speed and quantity, network and disk bandwidth, choice of codecs, and other factors. See switch.conf.xml for the persistent setting max-sessions.
max_dtmf_duration
Usage: fsctl max_dtmf_duration [int]
Default = 192000 clock ticks
Example:
fsctl max_dtmf_duration 80000
This example sets the max_dtmf_duration switch parameter to 10,000ms (10 seconds). The integer is specified in clock ticks (CT) where CT / 8 = ms. The max_dtmf_duration caps the playout of a DTMF event at the specified duration. Events exceeding this duration will be truncated to this duration. You cannot configure a duration that exceeds this setting. This setting can be lowered, but cannot exceed 192000 (the default). This setting cannot be set lower than min_dtmf_duration. This setting can be set persistently in switch.conf.xml as max-dtmf-duration.
To query the current value:
fsctl max_dtmf_duration 0
FreeSWITCH recognizes a duration of 0 as a status check. Instead of setting the value to 0, it simply returns the current value.
min_dtmf_duration
Usage: fsctl min_dtmf_duration [int]
Default = 400 clock ticks
Example:
fsctl min_dtmf_duration 800
This example sets the min_dtmf_duration switch parameter to 100ms. The integer is specified in clock ticks (CT) where CT / 8 = ms. The min_dtmf_duration specifies the minimum DTMF duration to use on outgoing events. Events shorter than this will be increased in duration to match min_dtmf_duration. You cannot configure a DTMF duration on a profile that is less than this setting. You may increase this value, but cannot set it lower than 400 (the default). This value cannot exceed max_dtmf_duration. This setting can be set persistently in switch.conf.xml as min-dtmf-duration.
It is worth noting that many devices squelch in-band DTMF when sending RFC 2833. Devices that squelch in-band DTMF have a certain reaction time and clamping time which can sometimes reach as high as 40ms, though most can do it in less than 20ms. As the shortness of your DTMF event duration approaches this clamping threshold, the risk of your DTMF being ignored as a squelched event increases. If your call is always IP-IP the entire route, this is likely not a concern. However, when your call is sent to the PSTN, the RFC 2833 DTMF events must be encoded in the audio stream. This means that other devices down the line (possibly a PBX or IVR that you are calling) might not hear DTMF tones that are long enough to decode and so will ignore them entirely. For this reason, it is recommended that you do not send DTMF events shorter than 80ms.
TODO RFC 2833 is obsoleted by RFC 4733.
Checking the current value:
fsctl min_dtmf_duration 0
FreeSWITCH recognizes a duration of 0 as a status check. Instead of setting the value to 0, it simply returns the current value.
min_idle_cpu
Usage: fsctl min_idle_cpu [int]
Allocates the minimum percentage of CPU idle time available to other processes to prevent FreeSWITCH from consuming all available CPU cycles.
Example:
fsctl min_idle_cpu 10
This allocates a minimum of 10% CPU idle time which is not available for processing by FS. Once FS reaches 90% CPU consumption it will respond with cause code 503 to additional SIP requests until its own usage drops below 90%, while reserving that last 10% for other processes on the machine.
pause
Usage: fsctl pause [inbound|outbound]
Pauses the ability to receive inbound or originate outbound calls, or both directions if the keyword is omitted. Executing fsctl pause inbound will also prevent registration requests from being processed. Executing fsctl pause outbound will result in the Critical log message "The system cannot create any outbound sessions at this time" in the FS log.
Use resume with the corresponding argument to restore normal operation.
pause_check
Usage: fsctl pause_check [inbound|outbound]
Returns true if the specified mode is active.
Examples:
fsctl pause_check inbound
true
indicates that inbound calls and registrations are paused. Use fsctl resume inbound to restore normal operation.
fsctl pause_check
true
indicates that both inbound and outbound sessions are paused. Use fsctl resume to restore normal operation.
ready_check
Usage: fsctl ready_check
Returns true if the system is in the ready state, as opposed to awaiting an elegant shutdown or other not-ready state.
reclaim_mem
Usage: fsctl reclaim_mem
recover
Usage: fsctl recover
Sends an endpoint–specific recover command to each channel detected as recoverable. This replaces “sofia recover” and makes it possible to have multiple endpoints besides SIP implement recovery.
resume
Usage: fsctl resume [inbound|outbound]
Resumes normal operation after pausing inbound, outbound, or both directions of call processing by FreeSWITCH.
Example:
fsctl resume inbound
+OK
Resumes processing of inbound calls and registrations. Note that this command always returns +OK, but the same keyword must be used that corresponds to the one used in the pause command in order to take effect.
save_history
Usage: fsctl save_history
Write out the command history in anticipation of executing a configuration that might crash FS. This is useful when debugging a new module or script to allow other developers to see what commands were executed before the crash.
send_sighup
Usage: fsctl send_sighup
Does the same thing that killing the FS process with -HUP would do without having to use the UNIX kill command. Useful in environments like Windows where there is no kill command or in cron or other scripts by using fs_cli -x "fsctl send_sighup" where the FS user process might not have privileges to use the UNIX kill command.
shutdown
Usage: fsctl shutdown [asap|asap restart|cancel|elegant|now|restart|restart asap|restart elegant]
- cancel - discontinue a previous shutdown request.
- elegant - wait for all traffic to stop, while allowing new traffic.
- asap - wait for all traffic to stop, but deny new traffic.
- now - shutdown FreeSWITCH immediately.
- restart - restart FreeSWITCH immediately following the shutdown.
When giving "elegant", "asap" or "now" it's also possible to add the restart command:
shutdown_check
Usage: fsctl shutdown_check
Returns true if FS is shutting down, or shutting down and restarting.
sps
Usage: fsctl sps [int]
This changes the sessions-per-second limit from the value initially set in switch.conf
sync_clock
Usage: fsctl sync_clock
FreeSWITCH will not trust the system time. It gets one sample of system time when it first starts and uses the monotonic clock after that moment. You can sync it back to the current value of the system's real-time clock with fsctl sync_clock
Note: fsctl sync_clock immediately takes effect, which can affect the times on your CDRs. You can end up underbilling/overbilling, or even calls hungup before they originated. e.g. if FS clock is off by 1 month, then your CDRs will show calls that lasted for 1 month!
See fsctl sync_clock_when_idle which is much safer.
sync_clock_when_idle
Usage: fsctl sync_clock_when_idle
Synchronize the FreeSWITCH clock to the host machine's real-time clock, but wait until there are 0 channels in use. That way it doesn't affect any CDRs.
verbose_events
Usage: fsctl verbose_events [on|off]
Enables verbose events. Verbose events have every channel variable in every event for a particular channel. Non-verbose events have only the pre-selected channel variables in the event headers.
See switch.conf.xml for the persistent setting of verbose-channel-events.
global_getvar
Gets the value of a global variable. If the parameter is not provided then it gets all the global variables.
Usage: global_getvar [
global_setvar
Sets the value of a global variable.
Usage: global_setvar
Example:
global_setvar outbound_caller_id=2024561000
group
TODO
group_call
Returns the bridge string defined in a call group.
Usage: group_call group@domain[+F|+A|+E]
+F will return the group members in a serial fashion separated by | (the pipe character)
+A (default) will return them in a parallel fashion separated by , (comma)
+E will return them in a enterprise fashion separated by :_: (colon underscore colon).
There is no space between the domain and the optional flag. See Groups in the XML User Directory for more information.
Please note: If you need to have outgoing user variables set in leg B, make sure you don't have dial-string and group-dial-string in your domain or dialed group variables list; instead set dial-string or group-dial-string in the default group of the user. This way group_call will return user/101 and user/ would set all your user variables to the leg B channel.
The B leg receives a new variable, dialed_group, containing the full group name.
help
Show help for all the API commands.
Usage: help
host_lookup
Performs a DNS lookup on a host name.
Usage: host_lookup
hupall
Disconnect existing channels.
Usage: hupall
All channels with
Example:
originate {foo=bar}sofia/internal/[email protected],sofia/internal/[email protected] &park
hupall normal_clearing foo bar
To hang up all calls on the switch indiscriminately:
hupall system_shutdown
in_group
Determine if a user is a member of a group.
Usage: in_group
is_lan_addr
See if an IP is a LAN address.
Usage: is_lan_addr
json
JSON API
Usage: json {"command" : "...", "data" : "..."}
Example
> json {"command" : "status", "data" : ""}
{"command":"status","data":"","status":"success","response":{"systemStatus":"ready","uptime":{"years":0,"days":20,"hours":20,"minutes":37,"seconds":4,"milliseconds":254,"microseconds":44},"version":"1.6.9 -16-d574870 64bit","sessions":{"count":{"total":132,"active":0,"peak":2,"peak5Min":0,"limit":1000},"rate":{"current":0,"max":30,"peak":2,"peak5Min":0}},"idleCPU":{"used":0,"allowed":99.733333},"stackSizeKB":{"current":240,"max":8192}}}
load
Load external module
Usage: load
Example:
load mod_v8
md5
Return MD5 hash for the given input data
Usage: md5 hash-key
Example:
md5 freeswitch-is-awesome
765715d4f914bf8590d1142b6f64342e
module_exists
Check if module is loaded.
Usage: module_exists
Example:
module_exists mod_event_socket
true
msleep
Sleep for x number of milliseconds
Usage: msleep
nat_map
Manage Network Address Translation mapping.
Usage: nat_map [status|reinit|republish] | [add|del]
- status - Gives the NAT type, the external IP, and the currently mapped ports.
- reinit - Completely re-initializes the NAT engine. Use this if you have changed routes or have changed your home router from NAT mode to UPnP mode.
- republish - Causes FreeSWITCH to republish the NAT maps. This should not be necessary in normal operation.
- mapping - Controls whether port mapping requests will be sent to the NAT (the command line option of -nonatmap can set it to disable on startup). This gives the ability of still using NAT for getting the public IP without opening the ports in the NAT.
Note: sticky makes the mapping stay across FreeSWITCH restarts. It gives you a permanent mapping.
Warning: If you have multiple network interfaces with unique IP addresses defined in sip profiles using the same port, nat_map *will* get confused when it tries to map the same ports for multiple profiles. Set up a static mapping between the public address and port and the private address and port in the sip_profiles to avoid this problem.
regex
Evaluate a regex (regular expression).
Usage: regex |
regex m://
regex m:~~
This command behaves differently depending upon whether or not a substitution string and optional flag is supplied:
- If a subst is not supplied, regex returns either "true" if the pattern finds a match or "false" if not.
- If a subst is supplied, regex returns the subst value on a true condition.
- If a subst is supplied, on a false (no pattern match) condition regex returns:
- the source string with no flag;
- with the n flag regex returns null which forces the response "-ERR no reply" from regex;
- with the b flag regex returns "false"
The regex delimiter defaults to the | (pipe) character. The delimiter may be changed to ~ (tilde) or / (forward slash) by prefixing the regex with m:
Examples:
regex test1234|\d <== Returns "true"
regex m:/test1234/\d <== Returns "true"
regex m:~test1234~\d <== Returns "true"
regex test|\d <== Returns "false"
regex test1234|(\d+)|$1 <== Returns "1234"
regex sip:[email protected]|^sip:(.*)|$1 <== Returns "[email protected]"
regex testingonetwo|(\d+)|$1 <== Returns "testingonetwo" (no match)
regex m:~30~/^(10|20|40)$/~$1 <== Returns "30" (no match)
regex m:~30~/^(10|20|40)$/~$1~n <== Returns "-ERR no reply" (no match)
regex m:~30~/^(10|20|40)$/~$1~b <== Returns "false" (no match)
Logic in revision 14727 if the source string matches the result then the condition was false however there was a match and it is 1001.
regex 1001|/(^\d{4}$)/|$1
- See also Regular_Expression
reload
Reload a module.
Usage: reload
reloadacl
Reload Access Control Lists after modifying them in autoload_configs/acl.conf.xml and as defined in extensions in the user directory conf/directory/*.xml
Usage: reloadacl [reloadxml]
reloadxml
Reload conf/freeswitch.xml settings after modifying configuration files.
Usage: reloadxml
show
Display various reports, VERY useful for troubleshooting and confirming proper configuration of FreeSWITCH. Arguments can not be abbreviated, they must be specified fully.
Usage: show [
aliases |
api |
application |
bridged_calls |
calls [count] |
channels [count|like
chat |
codec |
complete |
detailed_bridged_calls |
detailed_calls |
dialplan |
endpoint |
file |
interface_types |
interfaces |
limits
management |
modules |
nat_map |
registrations |
say |
tasks |
timer |
] [as xml|as delim
XML formatted:
show foo as xml
JSON formatted:
show foo as json
Example
fs_cli -x "show channels as json" | jq
Example output
{
"row_count": 1,
"rows": [
{
"uuid": "aa47bc9c-ab5e-11ea-85f1-311ce82e049e",
"direction": "inbound",
"created": "2020-06-10 17:09:26",
"created_epoch": "1591823366",
"name": "sofia/internal/[email protected]",
"state": "CS_EXECUTE",
"cid_name": "1019",
"cid_num": "1019",
"ip_addr": "192.0.2.50",
"dest": "55",
"application": "echo",
"application_data": "",
"dialplan": "XML",
"context": "default",
"read_codec": "PCMU",
"read_rate": "8000",
"read_bit_rate": "64000",
"write_codec": "PCMU",
"write_rate": "8000",
"write_bit_rate": "64000",
"secure": "",
"hostname": "hostname.local",
"presence_id": "[email protected]",
"presence_data": "",
"accountcode": "1019",
"callstate": "ACTIVE",
"callee_name": "",
"callee_num": "",
"callee_direction": "",
"call_uuid": "",
"sent_callee_name": "",
"sent_callee_num": "",
"initial_cid_name": "1019",
"initial_cid_num": "1019",
"initial_ip_addr": "192.0.2.50",
"initial_dest": "55",
"initial_dialplan": "XML",
"initial_context": "default"
}
]
}
Change delimiter:
show foo as delim |
- aliases – list defined command aliases
- api – list API commands exposed by loadable modules
- application – list applications exposed by loadable modules, notably mod_dptools
- bridged_calls – deprecated, use "show calls"
- calls [count] – list details of currently active calls; the keyword "count" eliminates the details and only prints the total count of calls
- channels [count|like
] – list current channels; see Channels vs Calls - count – show only the count of active channels, no details
- like
– filter results to include only channels that contain in uuid, channel name, cid_number, cid_name, presence data fields.
- chat – list chat interfaces
- codec – list codecs that are currently loaded in FreeSWITCH
- complete – list command argument completion tables
- detailed_bridged_calls – same as "show detailed_calls"
- detailed_calls – like "show calls" but with more fields
- dialplan – list dialplan interfaces
- endpoint – list endpoint interfaces currently available to FS
- file – list supported file format interfaces
- interface_types – list all interface types with a summary count of each type of interface available
- interfaces – enumerate all available interfaces by type, showing the module which exposes each interface
- limits – list database limit interfaces
- management – list management interfaces
- module – enumerate modules and the path to each
- nat_map – list Network Address Translation map
- registrations – enumerate user extension registrations
- say – enumerate available TTS (text-to-speech) interface modules with language supported
- tasks – list FS tasks
- timer – list timer modules
Tips For Showing Calls and Channels
The best way to get an understanding of all of the show calls/channels is to use them and observe the results. To display more fields:
- show detailed_calls
- show bridged_calls
- show detailed_bridged_calls
These three take the expand on information shown by "show calls". Note that "show detailed_calls" replaces "show distinct_channels". It provides similar, but more detailed, information. Also note that there is no "show detailed_channels" command, however using "show detailed_calls" will yield the same net result: FreeSWITCH lists detailed information about one-legged calls and bridged calls by using "show detailed_calls", which can be quite useful while configuring and troubleshooting FS.
Filtering Results
To filter only channels matching a specific uuid or related to a specific call, set the presence_data channel variable in the bridge or originate application to a unique string. Then you can use:
show channels like foo
to list only those channels of interest. The like directive filters on these fields:
- uuid
- channel name
- caller id name
- caller id number
- presence_data
NOTE: presence_data must be set during bridge or originate and not after the channel is established.
shutdown
Stop the FreeSWITCH program.
Usage: shutdown
This works from the local console (FreeSWITCH running in the foreground) as well as fs_cli. To shutdown FS from an API call you should use "fsctl shutdown" which offers a number of options.
Shutdown from the console or fs_cli ignores arguments and exits immediately!
status
Show current FS status. Very helpful information to provide when asking questions on the mailing list or irc channel.
Usage: status
freeswitch@internal> status
UP 17 years, 20 days, 10 hours, 10 minutes, 31 seconds, 571 milliseconds, 721 microseconds
FreeSWITCH (Version 1.5.8b git 87751f9 2013-12-13 18:13:56Z 32bit) is ready
53987253 session(s) since startup
127 session(s) - peak 127, last 5min 253
55 session(s) per Sec out of max 60, peak 55, last 5min 253
1000 session(s) max
min idle cpu 0.00/97.71
strftime_tz
Displays formatted time, converted to a specific timezone. See /usr/share/zoneinfo/zone.tab for the standard list of Linux timezones.
Usage: strftime_tz
Example:
strftime_tz US/Eastern %Y-%m-%d %T
unload
Unload external module.
Usage: unload
version
Show version of the switch
Usage: version [short]
Examples:
freeswitch@internal> version
FreeSWITCH Version 1.5.8b+git~20131213T181356Z~87751f9eaf~32bit (git 87751f9 2013-12-13 18:13:56Z 32bit)
freeswitch@internal> version short
1.5.8b
xml_locate
Write active xml tree or specified branch to stdout.
Usage: xml_locate [root |
xml_locate root will return all XML being used by FreeSWITCH
xml_locate
xml_locate directory
xml_locate configuration
xml_locate dialplan
xml_locate phrases
Example:
xml_locate directory domain name example.com
xml_locate configuration configuration name ivr.conf
xml_wrap
Wrap another API command in XML.
Usage: xml_wrap
Call Management Commands
break
Deprecated. See uuid_break.
create_uuid
Creates a new UUID and returns it as a string.
Usage: create_uuid
originate
Originate a new call.
Usage
originate
FreeSWITCH will originate a call to
Originate Arguments
Arguments
URL you are calling. For more info on sofia SIP URL syntax see: FreeSwitch Endpoint Sofia- Destination, one of:
Destination number to search in dialplan; note that registered extensions will fail this way, use &bridge(user/xxxx) instead - &
( ) - "&" indicates what follows is an application name, not an exten
- (
) is optional (not all applications require parameters, e.g. park) - The most commonly used application names include:
park, bridge, javascript/lua/perl, playback (remove mod_native_file). - Note: Use single quotes to pass arguments with spaces, e.g. '&lua(test.lua arg1 arg2)'
- Note: There is no space between & and the application name
Defaults to 'XML' if not specified. Defaults to 'default' if not specified. CallerID name to send to Leg A. CallerID number to send to Leg A. Timeout in seconds; default = 60 seconds.
Originate Variables
Variables
These variables can be prepended to the dial string inside curly braces and separated by commas. Example:
originate {sip_auto_answer=true,return_ring_ready=false}user/1001 9198
Variables within braces must be separated by a comma.
- group_confirm_key
- group_confirm_file
- forked_dial
- fail_on_single_reject
- ignore_early_media - must be defined on Leg B in bridge or originate command to stop remote ringback from being heard by Leg A
- return_ring_ready
- originate_retries
- originate_retry_sleep_ms
- origination_caller_id_name
- origination_caller_id_number
- originate_timeout
- sip_auto_answer
Description of originate's related variables
Originate Examples
Examples
You can call a locally registered sip endpoint 300 and park the call like so Note that the "example" profile used here must be the one to which 300 is registered. Also note the use of % instead of @ to indicate that it is a registered extension.
originate sofia/example/300%pbx.internal &park()
Or you could instead connect a remote sip endpoint to extension 8600
originate sofia/example/[email protected] 8600
Or you could instead connect a remote SIP endpoint to another remote extension
originate sofia/example/[email protected] &bridge(sofia/example/[email protected])
Or you could even run a Javascript application test.js
originate sofia/example/[email protected] &javascript(test.js)
To run a javascript with arguments you must surround it in single quotes.
originate sofia/example/[email protected] '&javascript(test.js myArg1 myArg2)'
Setting channel variables to the dial string
originate {ignore_early_media=true}sofia/mydomain.com/[email protected] 15555551212
Setting SIP header variables to send to another FS box during originate
originate {sip_h_X-varA=111,sip_h_X-varB=222}sofia/mydomain.com/[email protected] 15555551212
Note: you can set any channel variable, even custom ones. Use single quotes to enclose values with spaces, commas, etc.
originate {my_own_var=my_value}sofia/mydomain.com/[email protected] 15555551212
originate {my_own_var='my value'}sofia/mydomain.com/[email protected] 15555551212
If you need to fake the ringback to the originated endpoint try this:
originate {ringback=\'%(2000,4000,440.0,480.0)\'}sofia/example/[email protected] &bridge(sofia/example/[email protected])
To specify a parameter to the Leg A call and the Leg B bridge application:
originate {'origination_caller_id_number=2024561000'}sofia/gateway/whitehouse.gov/2125551212 &bridge(['effective_caller_id_number=7036971379']sofia/gateway/pentagon.gov/3035554499)
If you need to make originate return immediately when the channel is in "Ring-Ready" state try this:
originate {return_ring_ready=true}sofia/gateway/someprovider/919246461929 &socket('127.0.0.1:8082 async full')
More info on return_ring_ready
You can even set music on hold for the ringback if you want:
originate {ringback=\'/path/to/music.wav\'}sofia/gateway/name/number &bridge(sofia/gateway/siptoshore/12425553741)
You can originate a call in the background (asynchronously) and playback a message with a 60 second timeout.
bgapi originate {ignore_early_media=true,originate_timeout=60}sofia/gateway/name/number &playback(message)
You can specify the UUID of an originated call by doing the following:
- Use create_uuid to generate a UUID to use.
- This will allow you to kill an originated call before it is answered by using uuid_kill.
- If you specify origination_uuid, it will remain the UUID for the answered call leg for the whole session.
originate {origination_uuid=...}user/[email protected]
TODO Event List#1.21CHANNEL_UUIDevent also mention the origination_uuid in conjunction with the bridge command, but couldn't find it documented there.
Here's an example of originating a call to the echo conference (an external sip URL) and bridging it to a local user's phone:
originate sofia/internal/[email protected] &bridge(user/105@default)
Here's an example of originating a call to an extension in a different context than 'default' (required for the FreePBX which uses context_1, context_2, etc.):
originate sofia/internal/[email protected] 3001 xml context_3
You can also originate to multiple extensions as follows:
originate user/1001,user/1002,user/1003 &park()
To put an outbound call into a conference at early media, either of these will work (they are effectively the same thing)
originate sofia/example/[email protected] &conference(conf_uuid-TEST_CON)
originate sofia/example/[email protected] conference:conf_uuid-TEST_CON inline
See mod_dptools: Inline Dialplan for more detail on 'inline' Dialplans
An example of using loopback and inline on the A-leg can be found in this mailing list post
originate的语法：
originate
[
首先，它的第一个参数call_url是呼叫字符串。第二个参数可以是一个exten（这个一会再讲），或者&加上 一个App，App的参数要放到括号里，如：
originate user/1000 &echo
originate user/1000 &playback(/tmp/sound.wav)
originate user/1000 &record(/tmp/recording.wav)
这是最简单的形式，首先，originate会产生一个Channel，它会呼叫user/1000这个用户。请注意，这是一个 单腿的通话，因此只有一个Channel。但一个Channel有两端，一端是1000这个用户，另一端是FreeSWITCH（我们 上面已经说过，实现上是1000在跟FreeSWITCH的某个App通话，如这里的echo、playback或record）。 在user/1000接电话后（严格说是收到它的earlymedia后），FreeSWITCH即开始在该Channel上执行&后面的 App。但这种形式只能执行一个App，如果要执行多个，就需要将电话转入Dialplan，可以使用下面的形式：
originate user/1000 9196
originate user/1000 9196 XML default
上面两个命令的效果是一样的。它们的作用是，在user/1000接听电话后，电话的另一端（也就是
FreeSWITCH）需要对电话进行路由，在这里它要将电话路由到9196这个Extension上，第一条命令由于没有指定是
哪个Dialplan，因此它会在默认的XML Dialplan中查找，同时XML Dialplan需要一个Context，它默认就是
default。它的效果跟直接用软电话拨打9196这个分机一样（不同的是呼叫方向的问题，这种情况相当于回拨）。
当然，除此之外，它还可以加一些可选的参数，用于指定来电显示（Caller ID）的名字（cid_name）和号码
（cid_number），以及呼叫超时的秒数，如：
originate user/1000 9196 XML default 'Seven Du' 9196 30
当然，我们这里学了inline Dialplan，所以你也可以用下面这种形式：
originate user/1000 echo inline
请注意，在XML Dialplan中，9196是一个分机号，而inline Dialplan中的echo是一个App，当然你也可以顺
序执行多个App。如下列第一条originate命令分别执行answer（应答）、playback（播放语音）、record（录
音），第二条则分别执行playback和bridge：
originate user/1000 answer,playback:/tmp/pleace_leave_a_message.wav,record:/tmp/recording.wav
inline
originate user/1000 playback:/tmp/beep.wav,bridge:user/1001 inline
有时候，App的参数中可能会有逗号，因而会与默认的App间的逗号分隔符相冲突，以下的m语法形式将默认的
逗号改为^分隔（相当于转义：
originate user/1000
'm:^:playback/tmp/beep.wav^bridge:
{ignore_early_media=true,originate_caller_id_number=1000}user/1001'
inline
其中，“m:^”表示将App间的分隔符临时改为了“^”，所以后面的bridge中的参数中的逗号就不会误认为是
App间的分隔符了。
当然你也可以把inlineDialplan用在任何需要Dialplan的地方，如（以下两行实为一行）：
uuid_transfer 2bde6598-0f1a-48fe-80bc-a457a31b0055
'set:test_var=test_value,info,palyback:/tmp/beep.wav,record:/tmp/recording.wav'
上述命令会将一个Channel转入一个inline Dialplan，它首先执行set以设置一个test_var的通道变量，然后
执行info在日志中打印当前Channel的详细情况，接下来播放一个声音文件（如beep应该是“嘀”的一声），然后
开始录音。
pause
Pause
Usage
pause
Turning pause "on" activates the pause function, i.e. it pauses the playback of recorded media. Turning pause "off" deactivates the pause function and resumes playback of recorded media at the same point where it was paused.
Note: always returns -ERR no reply when successful; returns -ERR No such channel! when uuid is invalid.
uuid_answer
Answer a channel
Usage
uuid_answer
See Also
- mod_dptools: answer
uuid_audio
Adjust the audio levels on a channel or mute (read/write) via a media bug.
Usage
uuid_audio
Level is required for both mute|level params:
freeswitch@internal> uuid_audio 0d7c3b93-a5ae-4964-9e4d-902bba50bd19 start write mute
freeswitch@internal> uuid_audio 0d7c3b93-a5ae-4964-9e4d-902bba50bd19 start write level
(This command behaves funky. Requires further testing to vet all arguments. - JB)
See Also
- mod_dptools: set audio level
uuid_break
Break out of media being sent to a channel. For example, if an audio file is being played to a channel, issuing uuid_break will discontinue the media and the call will move on in the dialplan, script, or whatever is controlling the call.
Usage: uuid_break
If the all flag is used then all audio files/prompts/etc. that are queued up to be played to the channel will be stopped and removed from the queue, otherwise only the currently playing media will be stopped.
uuid_bridge
Bridge two call legs together.
Usage
uuid_bridge
uuid_bridge needs at least any one leg to be in the answered state. If, for example, one channel is parked and another channel is actively conversing on a call, executing uuid_bridge on these 2 channels will drop the existing call and bridge together the specified channels.
mod_dptools: bridge VS uuid_bridge
https://lists.freeswitch.org/pipermail/freeswitch-users/2014-September/108166.html
uuid_broadcast
Execute an arbitrary dialplan application, typically playing a media file, on a specific uuid. If a filename is specified then it is played into the channel(s). To execute an application use "app::args" syntax.
Usage
uuid_broadcast
Execute an application on a chosen leg(s) with optional hangup afterwards:
Usage
uuid_broadcast
Here are some examples:
Examples
uuid_broadcast 336889f2-1868-11de-81a9-3f4acc8e505e sorry.wav both
uuid_broadcast 336889f2-1868-11de-81a9-3f4acc8e505e say::en\snumber\spronounced\s12345 aleg
uuid_broadcast 336889f2-1868-11de-81a9-3f4acc8e505e say!::en\snumber\spronounced\s12345 aleg
uuid_broadcast 336889f2-1868-11de-81a9-3f4acc8e505e say!user_busy::en\snumber\spronounced\s12345 aleg
uuid_broadcast 336889f2-1868-11de-81a9-3f4acc8e505e playback!user_busy::sorry.wav aleg
uuid_buglist
List the media bugs on channel. Output is formatted as XML.
Usage
uuid_buglist
Example
uuid_buglist c2746178-ab61-11ea-86b8-311ce82e049e
Example output
uuid_chat
Send a chat message.
Usage
uuid_chat
If the endpoint associated with the session
uuid_debug_media
Debug media, either audio or video.
Usage
uuid_debug_media
Use "read" or "write" for the audio direction to debug, or "both" for both directions. And prefix with v for video media.
uuid_debug_media emits a HUGE amount of data. If you invoke this command from fs_cli, be prepared.
Example output
R sofia/internal/[email protected] b= 172 192.168.65.3:17668 192.168.65.114:16072 192.168.65.114:16072 pt=0 ts=2981605109 m=0
W sofia/internal/[email protected] b= 172 192.168.65.3:17668 192.168.65.114:16072 192.168.65.114:16072 pt=0 ts=12212960 m=0
R sofia/internal/[email protected] b= 172 192.168.65.3:17668 192.168.65.114:16072 192.168.65.114:16072 pt=0 ts=2981605269 m=0
W sofia/internal/[email protected] b= 172 192.168.65.3:17668 192.168.65.114:16072 192.168.65.114:16072 pt=0 ts=12213120 m=0
Read Format
"R %s b=%4ld %s:%u %s:%u %s:%u pt=%d ts=%u m=%d\n"
where the values are:
- switch_channel_get_name(switch_core_session_get_channel(session)),
- (long) bytes,
- my_host, switch_sockaddr_get_port(rtp_session->local_addr),
- old_host, rtp_session->remote_port,
- tx_host, switch_sockaddr_get_port(rtp_session->from_addr),
- rtp_session->recv_msg.header.pt,
- ntohl(rtp_session->recv_msg.header.ts),
- rtp_session->recv_msg.header.m
Write Format
"W %s b=%4ld %s:%u %s:%u %s:%u pt=%d ts=%u m=%d\n"
where the values are:
- switch_channel_get_name(switch_core_session_get_channel(session)),
- (long) bytes,
- my_host, switch_sockaddr_get_port(rtp_session->local_addr),
- old_host, rtp_session->remote_port,
- tx_host, switch_sockaddr_get_port(rtp_session->from_addr),
- send_msg->header.pt,
- ntohl(send_msg->header.ts),
- send_msg->header.m);
uuid_deflect
Deflect an answered SIP call off of FreeSWITCH by sending the REFER method
Usage: uuid_deflect
uuid_deflect waits for the final response from the far end to be reported. It returns the sip fragment from that response as the text in the FreeSWITCH response to uuid_deflect. If the far end reports the REFER was successful, then FreeSWITCH will issue a bye on the channel. (*)
(*) Starting with FreeSWITCH 1.10.7, a variable named sip_refer_continue_after_reply is introduced, if True, will let the current call continues as is, after sending the REFER message. This is useful when testing rfc4579 REFER method to request a Focus to Add a New Resource to a Conference
Example
uuid_deflect 0c9520c4-58e7-40c4-b7e3-819d72a98614 sip:[email protected]
Response:
Content-Type: api/response
Content-Length: 30
+OK:SIP/2.0 486 Busy Here
uuid_displace
Displace the audio for the target
Usage: uuid_displace
Arguments:
- uuid = Unique ID of this call (see 'show channels')
- start|stop = Start or stop this action
- file = path to an audio source (.wav file, shoutcast stream, etc...)
- limit = limit number of seconds before terminating the displacement
- mux = multiplex; mix the original audio together with 'file', i.e. both parties can still converse while the file is playing (if the level is not too loud)
To specify the 5th argument 'mux' you must specify a limit; if no time limit is desired on playback, then specify 0.
Examples
cli> uuid_displace 1a152be6-2359-11dc-8f1e-4d36f239dfb5 start /sounds/test.wav 60
cli> uuid_displace 1a152be6-2359-11dc-8f1e-4d36f239dfb5 stop /sounds/test.wav
uuid_display
Updates the display on a phone if the phone supports this. This works on some SIP phones right now including Polycom and Snom.
Usage:
Note the pipe character separating the Caller ID name and Caller ID number.
This command makes the phone re-negotiate the codec. The SIP -> RTP Packet Size should be 0.020 seconds. If it is set to 0.030 on the Cisco SPA series phones it causes a DTMF lag. When DTMF keys are pressed on the phone they are can be seen on the fs_cli 4-6 seconds late.
Example:
freeswitch@sidious> uuid_display f4053af7-a3b9-4c78-93e1-74e529658573 Fred Jones|1001
+OK Success
uuid_dual_transfer
Transfer each leg of a call to different destinations.
Usage:
uuid_dump
Dumps all variable values for a session.
Usage: uuid_dump
Format options: txt (default, may be omitted), XML, JSON, plain
uuid_early_ok
Stops the process of ignoring early media, i.e. if ignore_early_media=true, this stops ignoring early media coming from Leg B and responds normally.
Usage: uuid_early_ok
uuid_exists
Checks whether a given UUID exists.
Usage: uuid_exists
Returns true or false.
uuid_flush_dtmf
Flush queued DTMF digits
Usage: uuid_flush_dtmf
uuid_fileman
Manage the audio being played into a channel from a sound file
Usage: uuid_fileman
Commands are:
- speed:<+[step]>|<-[step]>
- volume:<+[step]>|<-[step]>
- pause (toggle)
- stop
- truncate
- restart
- seek:<+[milliseconds]>|<-[milliseconds]> (1000ms = 1 second, 10000ms = 10 seconds.)
Example to seek forward 30 seconds:
uuid_fileman 0171ded1-2c31-445a-bb19-c74c659b7d08 seek:+3000
(Or use the current channel via ${uuid}, e.g. in a bind_digit_action)
The 'pause' argument is a toggle: the first time it is invoked it will pause playback, the second time it will resume playback.
uuid_getvar
Get a variable from a channel.
Usage: uuid_getvar
uuid_hold
Place a channel on hold.
Usage:
uuid_hold
uuid_hold off
uuid_hold toggle
uuid_kill
Reset a specific
Usage: uuid_kill
If no cause code is specified, NORMAL_CLEARING will be used.
uuid_limit
Apply or change limit(s) on a specified uuid.
Usage: uuid_limit
See also mod_dptools: limit
uuid_media
Reinvite FreeSWITCH out of the media path:
Usage: uuid_media [off]
Reinvite FreeSWITCH back in:
Usage: uuid_media
uuid_media_reneg
Tell a channel to send a re-invite with optional list of new codecs to be renegotiated.
Usage: uuid_media_reneg
Example: Adding =PCMU makes the offered codec string absolute.
uuid_park
Park call
Usage: uuid_park
The specified channel will be parked and the other leg of the call will be disconnected.
uuid_pre_answer
Pre–answer a channel.
Usage: uuid_preanswer
See Also: Misc._Dialplan_Tools_pre_answer
uuid_preprocess
Pre-process Channel
Usage: uuid_preprocess
uuid_recv_dtmf
Usage: uuid_recv_dtmf
uuid_send_dtmf
Send DTMF digits to
Usage: uuid_send_dtmf
Use the character w for a .5 second delay and the character W for a 1 second delay.
Default tone duration is 2000ms .
uuid_send_info
Send info to the endpoint
Usage: uuid_send_info
uuid_session_heartbeat
Usage: uuid_session_heartbeat
uuid_setvar
Set a variable on a channel. If value is omitted, the variable is unset.
Usage: uuid_setvar
Dialplan equivalent
Example
uuid_setvar c2746178-ab61-11ea-86b8-311ce82e049e record_sample_rate 8000
uuid_setvar_multi
Set multiple vars on a channel.
Usage: uuid_setvar_multi
uuid_simplify
This command directs FreeSWITCH to remove itself from the SIP signaling path if it can safely do so.
Usage: uuid_simplify
Execute this API command to instruct FreeSWITCH™ to inspect the Leg A and Leg B network addresses. If they are both hosted by the same switch as a result of a transfer or forwarding loop across a number of FreeSWITCH™ systems the one executing this command will remove itself from the SIP and media path and restore the endpoints to their local FreeSWITCH™ to shorten the network path. This is particularly useful in large distributed FreeSWITCH™ installations.
For example, suppose a call arrives at a FreeSWITCH™ box in Los Angeles, is answered, then forwarded to a FreeSWITCH™ box in London, answered there and then forwarded back to Los Angeles. The London switch could execute uuid_simplify to tell its local switch to examine both legs of the call to determine that they could be hosted by the Los Angeles switch since both legs are local to it. Alternatively, setting sip_auto_simplify to true either globally in vars.xml or as part of a dailplan extension would tell FS to perform this check for each call when both legs supervise.
uuid_transfer
TODO What is the difference between uuid_transfer in mod_commands and mod_dptools: transfer?
Transfers an existing call to a specific extension within a
Usage
uuid_transfer
The optional first argument will allow you to transfer both parties (-both) or only the party to whom
NOTE: if the call has been bridged, and you want to transfer either side of the call, then you will need to use
And more examples see Inline Dialplan
uuid_phone_event
Send hold indication upstream:
Usage
uuid_phone_event
uuid_phone_event 6f6bbc12-2a30-4dce-9297-f714943dacfc talk
Record/Playback Commands
uuid_record
Record the audio associated with the channel with the given UUID into a file. The start command causes FreeSWITCH to start mixing all call legs together and saves the result as a file in the format that the file's extension dictates. The stop command (if available) will stop the recording and close the file.
This API command is possibly broken and the "(if available)" remark may be an allusion to that: uuid_record seems to completely hijack control, no FreeSWITCH events are generated (neither on fs_cli nor to an event socket app), and the only way to stop it is by hanging up (as it doesn't seem to honour the playback_terminators variable).
Use mod_dptools:record or mod_dptools:record_session instead.
If media setup hasn't yet happened, the file will contain silent audio until media is available. Audio will be recorded for calls that are parked. The recording will continue through the bridged call. If the call is set to return to park after the bridge, the bug will remain on the call, but no audio is recorded until the call is bridged again.
TODO What if media doesn't flow through FreeSWITCH? Will it re-INVITE first? Or do we just not get the audio in that case?
See channel variables related to recording at mod_dptools:record. Another module worth looking at is mod_dptools: record_session.
Syntax
uuid_record
| Parameter |
Description |
| uuid |
UUID of the channel. |
| start |
Start recording the audio. |
| stop |
Stop recording. all may be used for uuid_record |
| mask |
Mask with silence part of the recording beginning when the mask argument is executed by this command. See http://jira.freeswitch.org/browse/FS-5269 |
| unmask |
Stop the masking and continue recording live audio normally. See Issues · signalwire/freeswitch · GitHub |
| path |
Record to file specified by given path. If only filename is given the it will be saved to channel variable sound_prefix, or base_dir when sound_prefix not set. |
| limit |
(optional) The maximum duration of the recording in seconds. |
Limit Commands
More information is available at Limit commands
limit_reset
Reset a limit backend.
limit_status
Retrieve status from a limit backend.
limit_usage
Retrieve usage for a given resource.
uuid_limit_release
Manually decrease a resource usage by one.
limit_interval_reset
Reset the interval counter to zero prior to the start of the next interval.
Miscellaneous Commands
bg_system
Execute a system command in the background.
Usage: bg_system
echo
Echo input back to the console
Usage: echo
Example:
echo This text will appear
This text will appear
file_exists
Tests whether filename exists.
file_exists filename
Examples:
freeswitch> file_exists /tmp/real_file
true
freeswitch> file_exists /tmp/missing_file
false
Example dialplan usage:
file_exists example
file_exists tests whether FreeSWITCH can see the file, but the file may still be unreadable because of restrictive permissions.
Example start/stop record to rtmp
uuid_record c2746178-ab61-11ea-86b8-311ce82e049e start rtmp://domain.com/stream:teststream
uuid_record c2746178-ab61-11ea-86b8-311ce82e049e stop rtmp://domain.com/stream:teststream
find_user_xml
Checks to see if a user exists. Matches user tags found in the directory, similar to user_exists, but returns an XML representation of the user as defined in the directory (like the one shown in user_exists).
Usage: find_user_xml
list_users
Lists Users configured in Directory
Usage:
list_users [group
Examples:
freeswitch@localhost> list_users group default
userid|context|domain|group|contact|callgroup|effective_caller_id_name|effective_caller_id_number
2000|default|192.168.20.73|default|sofia/internal/sip:[email protected]:5060|techsupport|B#-Test 2000|2000
2001|default|192.168.20.73|default|sofia/internal/sip:[email protected]:63412;rinstance=8e2c8b86809acf2a|techsupport|Test 2001|2001
2002|default|192.168.20.73|default|error/user_not_registered|techsupport|Test 2002|2002
2003|default|192.168.20.73|default|sofia/internal/sip:[email protected]:5060|techsupport|Test 2003|2003
2004|default|192.168.20.73|default|error/user_not_registered|techsupport|Test 2004|2004
+OK
Search filters can be combined:
freeswitch@localhost> list_users group default user 2004
userid|context|domain|group|contact|callgroup|effective_caller_id_name|effective_caller_id_number
2004|default|192.168.20.73|default|error/user_not_registered|techsupport|Test 2004|2004
+OK
sched_api
Schedule an API call in the future.
Usage
sched_api [+@]
A scheduled task or group of tasks can be revoked with sched_del or unsched_api.
You could append the "&" symbol to the end of the line to executed this command in its own thread.
Examples
sched_api +1800 none originate sofia/internal/1000%${sip_profile} &echo()
sched_api @600 check_sched log Periodic task is running...
sched_api +10 ${uuid} chat verto|[email protected]|[email protected]|Hello World
sched_broadcast
Play a
Usage
sched_broadcast [[+]
Schedule execution of an application on a chosen leg(s) with optional hangup:
sched_broadcast [+]
Examples
sched_broadcast +60 336889f2-1868-11de-81a9-3f4acc8e505e commercial.wav both
sched_broadcast +60 336889f2-1868-11de-81a9-3f4acc8e505e say::en\snumber\spronounced\s12345 aleg
sched_del
Removes a prior scheduled group or task ID
Usage
sched_del
The one argument can either be a group of prior scheduled tasks or the returned task-id from sched_api.
sched_transfer, sched_hangup and sched_broadcast commands add new tasks with group names equal to the channel UUID. Thus, sched_del with the channel UUID as the argument will remove all previously scheduled hangups, transfers and broadcasts for this channel.
Examples
sched_del my_group
sched_del 2
sched_hangup
Schedule a running call to hangup.
Usage
sched_hangup [+]
sched_hangup +0 is the same as uuid_kill
sched_transfer
Schedule a transfer for a running call.
Usage
sched_transfer [+]
sched_transfer "+600 uuid 900699 XML doosan_inbound_target "
stun
Executes a STUN lookup.
Usage:
stun
Example:
stun stun.freeswitch.org
system
Execute a system command.
Usage:
system
The
If a malicious remote caller somehow sets his caller ID name to "; rm -rf /" you would unintentionally be executing this shell command:
log_caller_name; rm -rf /
This would be a Bad Thing.
time_test
Runs a test to see how bad timer jitter is. It runs the test
Usage:
time_test
Example:
time_test 100 5
test 1 sleep 100 99
test 2 sleep 100 97
test 3 sleep 100 96
test 4 sleep 100 97
test 5 sleep 100 102
avg 98
timer_test
Runs a test to see how bad timer jitter is. Unlike time_test, this uses the actual FreeSWITCH timer infrastructure to do the timer test and exercises the timers used for call processing.
Usage:
timer_test <10|20|40|60|120> [<1..200>] [
The first argument is the timer interval.
The second is the number of test iterations.
The third is the timer name; "show timers" will give you a list.
Example:
timer_test 20 3
Avg: 16.408ms Total Time: 49.269ms
2010-01-29 12:01:15.504280 [CONSOLE] mod_commands.c:310 Timer Test: 1 sleep 20 9254
2010-01-29 12:01:15.524351 [CONSOLE] mod_commands.c:310 Timer Test: 2 sleep 20 20042
2010-01-29 12:01:15.544336 [CONSOLE] mod_commands.c:310 Timer Test: 3 sleep 20 19928
tone_detect
Start Tone Detection on a channel.
Usage:
tone_detect
0 = detect forever
+time = number of milliseconds after tone_detect is executed
time = absolute time to stop in seconds since The Epoch (1 January, 1970)
Once tone_detect returns a result, it will not trigger again until reset. Reset tone_detect by calling tone_detect
See also http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_tone_detect
unsched_api
Unschedule a previously scheduled API command.
Usage
unsched_api
url_decode
Usage:
url_decode
url_encode
Url encode a string.
Usage:
url_encode
user_data
Retrieves user information (parameters or variables) as defined in the FreeSWITCH user directory.
Usage:
user_data
Examples:
user_data [email protected] param password
will return a result of 1234, and
user_data [email protected] var accountcode
will return a result of 1000 from the example user shown in user_exists, and
user_data [email protected] attr id
will return the user's actual alphanumeric ID (i.e. "john") when number-alias="1000" was set as an attribute for that user.
user_exists
Checks to see if a user exists. Matches user tags found in the directory and returns either true/false:
Usage:
user_exists
Example:
user_exists id 1000 192.168.1.101
will return true where there exists in the directory a user with a key called id whose value equals 1000:
User Directory Entry
In the above example, we also could have tested for randomvar:
user_exists randomvar 45 192.168.1.101
And we would have received the same true result, but:
user_exists accountcode 1000 192.168.1.101
or
user_exists vm-password 1000 192.168.1.101
Would have returned false.
See Also
- Channel Variables
在FreeSwitch终端输入help后显示的所有终端命令（默认）：
acl,
alias,[add|stickyadd]
banner,,Return the system banner,mod_commands
bg_system,
bgapi,
break,
cdr_csv,parameters,cdr_csvcontrols,mod_cdr_csv
chat,
coalesce,[^^
complete,add
cond,
conference,,Conference modulecommands,mod_conference
console,loglevel [level]|colorize[on|toggle|off],Console,mod_console
console_complete,
console_complete_xml,
create_uuid,
db,[insert|delete|select|exists|count|list]/
db_cache,status,Manage dbcache,mod_commands
domain_exists,
echo,,Echo,mod_commands
enum,,ENUM,mod_enum
enum_auto,,ENUM,mod_enum
escape,,Escape astring,mod_commands
eval,[uuid:
event_sink,
expand,[uuid:
expr,
fifo,list|list_verbose|count|debug|status|has_outbound|importance[
fifo_add_outbound,
fifo_check_bridge,
fifo_member,[add
file_exists,
find_user_xml,
fsctl,[recover|send_sighup|hupall|pause [inbound|outbound]|resume[inbound|outbound]|shutdown[cancel|elegant|asap|now|restart]|sps|sps_peak_reset|sync_clock|sync_clock_when_idle|reclaim_mem|max_sessions|min_dtmf_duration[num]|max_dtmf_duration [num]|default_dtmf_duration [num]|min_idle_cpu|loglevel[level]|debug_level [level]],FS control mes sages,mod_commands
getcputime,[reset],Gets CPU time inmilliseconds (user,kernel),mod_commands
getenv,
gethost,,gethostbyname,mod_commands
global_getvar,,Get globalvar,mod_commands
global_setvar,=
group,[insert|delete|call]:
group_call,
hash,[insert|delete|select]/
hash_dump,all|limit|db [
hash_remote,list|kill [name]|rescan,hashremote,mod_hash
help,,Show help for all the apicommands,mod_commands
host_lookup,
hostname,,Return the systemhostname,mod_commands
httapi,[debug_on|debug_off],HT-TAPIHypertext Telephony API,mod_httapi
hupall,
in_group,
interface_ip,[auto|ipv4|ipv6]
is_lan_addr,
json,JSON,JSON API,mod_commands
limit_hash_usage,
limit_interval_reset,
limit_reset,
limit_status,
limit_usage,
list_users,[group
load,
local_stream,
log,
lua,