Centos7 svn 部署及主从同步配置

背景

IP:172.16.14.6(主) 172.16.17.2(从)

17.2 安装svn

安装配置SVN服务

[root@iz2 ~]# yum install subversion -y

[root@iz2 hooks]# cat /usr/lib/systemd/system/svnserve.service  
[Unit]  
Description=Subversion protocol daemon  
After=syslog.target network.target

[Service]  
Type=forking  
EnvironmentFile=/etc/sysconfig/svnserve  
ExecStart=/usr/bin/svnserve -d --config-file=/data/svn/svnserver.conf --pid-file=/run/svnserve/svnserve.pid $OPTIONS

[Install]  
WantedBy=multi-user.target  
 

[root@iz2 ~]# systemctl daemon-reload  
[root@iz2 ~]# systemctl start svnserve.service  
Job for svnserve.service failed because the control process exited with error code. See "systemctl status svnserve.service" and "journalctl -xe" for details.  
[root@iz2z ~]# systemctl status svnserve.service  
● svnserve.service - Subversion protocol daemon  
   Loaded: loaded (/usr/lib/systemd/system/svnserve.service; disabled; vendor preset: disabled)  
   Active: failed (Result: exit-code) since Fri 2020-05-08 14:15:58 CST; 10s ago  
  Process: 29000 ExecStart=/usr/bin/svnserve -d --config-file=/data/svn/svnserver.conf --pid-file=/run/svnserve/svnserve.pid $OPTIONS (code=exited, status=1/FAILURE)

May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz systemd[1]: Starting Subversion protocol daemon...  
May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz svnserve[29000]: svnserve: Root path '/var/svn' does not exist or is not a directory.                      //没有svn的家目录  
May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz systemd[1]: svnserve.service: control process exited, code=exited status=1  
May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz systemd[1]: Failed to start Subversion protocol daemon.  
May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz systemd[1]: Unit svnserve.service entered failed state.  
May 08 14:15:58 iz2ze8ip0m748wp4lnu6piz systemd[1]: svnserve.service failed.  
[root@iz2z ~]# systemctl restart svnserve.service  
Job for svnserve.service failed because the control process exited with error code. See "systemctl status svnserve.service" and "journalctl -xe" for details.

  
[root@iz2z ~]# svnadmin create /data/svn/develop/  
[root@iz2z ~]# systemctl restart svnserve.service  
Job for svnserve.service failed because the control process exited with error code. See "systemctl status svnserve.service" and "journalctl -xe" for details. 

[root@iz2z hooks]# cat /etc/sysconfig/svnserve  
# OPTIONS is used to pass command-line arguments to svnserve.  
#   
# Specify the repository location in -r parameter:  
OPTIONS="-r /data/svn"                  ##修改svn  root path  
 

[root@iz2 ~]# systemctl restart svnserve.service

配置 svn 主从

需要在主服务机器配置 hook

• 记得把post-commit +x 执行权限（chmod +x post-commit ）

[root@iz2z hooks]# pwd  
/data/svn/develop/hooks  
[root@iz2zecs69qbuuy757q805kz hooks]# ls  
post-commit  post-commit.tmpl  post-lock.tmpl  post-revprop-change.tmpl  post-unlock.tmpl  pre-commit.tmpl  pre-lock.tmpl  pre-revprop-change  pre-revprop-change.tmpl  pre-unlock.tmpl  start-commit.tmpl  
[root@iz2z hooks]# cat post-commit  
#!/bin/bash  
  
REPOS="$1"  
REV="$2"

mailer.py commit "$REPOS" "$REV" /path/to/mailer.conf  
svnsync sync svn://172.16.17.2/develop

重启服务后 当出现 如下报错

• svnsync init
• svn: E165006: Repository has not been enabled to accept revision propchanges;
• ask the administrator to create a pre-revprop-change hook

[root@iz2z hooks]# ls  
post-commit  post-commit.tmpl  post-lock.tmpl  post-revprop-change.tmpl  post-unlock.tmpl  pre-commit.tmpl  pre-lock.tmpl  pre-revprop-change  pre-revprop-change.tmpl  pre-unlock.tmpl  start-commit.tmpl  
[root@iz2zecs69qbuuy757q805kz hooks]# cat pre-revprop-change  
#! /bin/sh  
exit 0  
 

[root@iz2z ~]# chmod +x pre-revprop-change

[root@iz2z ~]# systemctl restart svnserve.service

在14.6（主） ： svnsync sync svn://172.16.17.2/develop