duplicate symbols for architecture arm64 after xCode 8.0 update

一.swift2.0升级到swift3.0的问题

1，旧项目，使用xcode8打开时，会自动询问，是否自动将 swift2.3语法，升级到swift3.0；可以选择转换，转换之后，如果还有报错的地方，需要自己手动处理swift语法错误；

2，如果不升级swift语法，可以在build setting 中，设置Use Legacy Swift Language Version 为YES；即：允许使用低版本swift；

二.项目编译期间，报符号重定义的错误：duplicate symbols

1.png

解决方案：

1，Build Setting 中，设置NO Common Blocks 为NO； 【该选项的意思，官方解释如下】

In C, allocate even uninitialized global variables in the data section of the object file, rather than generating them as common blocks. This has the effect that if the same variable is declared (without extern ) in two different compilations, you will get an error when you link them. The only reason this might be useful is if you wish to verify that the program will work on other systems which always work this way.

2，如果1不起作用，继续Build Setting 中，设置Enable Testability 为NO；【该选项的意思，解释如下】（或者查看重定义的符号，是否声明为了static 类型）

3,升级到xcode8.1也完美解决

From The Xcode 8 Release Notes:
When the Enable Testability build setting is enabled, Xcode 8 will pass -export_dynamic to the linker to preserve all global symbols for testing. This effectively overrides dead code stripping, which can expose link failures from unused functions that reference undefined symbols. If necessary, disabling testability will allow the link to proceed without source changes. (27684883)
Of course, the best thing to do is to either: a) remove the unused code that is causing the linker issues, or b) actually fix the linker issues.